RAB Lighting ALED13Y LED Area Light 13 Watt, 662 Lumens, Warm White 3000K Color Temp, Bronze Finish
Click to Enlarge
This item does NOT include the pole. Pole is sold separately.
ALED Area Light mounts to 4" square steel poles at 10-15'. 1 to 4 ALEDs can be mounted to each pole. IESNA Full Cutoff, Fully shielded
Color Temp: 3000K (Warm)
Color Accuracy: 87
L70 Lifespan: 100000
LM79 Lumens: 662
Efficacy: 44 LPW
Suitable for wet locations.
The LED will deliver 70% of its initial lumens at 100,000
hours of operation.
The Type III distribution is ideal for roadway, general parking, and
other area lighting applications where a larger pool of lighting is
required. It is intended to be located near the side of the area,
allowing the light to project outward and fill the area.
Precision die cast aluminum housing, lens frame.
High temperature silicone.
Chip and fade resistant polyester powder coat finish.
ALEDs are Mercury, Arsenic and UV free.
IESNA LM-79 & IESNA LM-80 Testing:
RAB LED luminaires have been tested by an independent laboratory in
accordance with IESNA
LM-79 and 80, and have received the Department of Energy "Lighting
RAB LEDs exceed industry standards for chromatic stability.
|Effective Projected Area:
EPA = 0.2
RAB's range of CCT (Correlated color temperature) follows the guidelines
of the American National Standard for Specifications for the
Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2008.
Cold Weather Starting:
The minimum starting temperature is -40°F/-40°C
Suitable for use in 40°C (104°F) ambient temperatures
Multi-chip 13W high output long life LED Driver Constant Current, Class
2 100V - 277V, 50/60 Hz
44 Lumens per Watt
Color Temperature (Nominal CCT):
The design of the ALED is protected by patents pending
in Canada, U.S., China and Taiwan
For specification sheet and dimension, click here - PDF