Juno Under Cabinet Lighting UPX109-WH 9-1/2 inch Pro Xenon 20W 12V Xenon Lamp, Includes Integrated Transformer, White Finish, Available in Bronze, Silver
Click to Enlarge
Juno Under Cabinet Lighting UPX109-WH 9-1/2" Pro Xenon WHITE,
Also Available in BRONZE, SILVER
The Pro-Xenon modular series with integral electronic
transformer operates 12-volt halogen lamps to deliver the best
color rendering with maximum light output and lamp life. The
efficient operation of low voltage lamps, along with a unique
housing/reflector system, reduces mounting surface temperatures
well below what is typical for xenon under cabinet fixtures.
Pro-Xenon fixtures are optimized for fast permanent
installation, mounting either flush to the rear backsplash or to
the front lip of cabinetry to suit project conditions and
12-volt 20W bi-pin high-output xenon lamp with 10,000 hours
Modular system for installation flexibility
Integral reflector increases light output and helps reduce
fixture housing temperature
Slim 1" profile
Integral 12-volt electronic transformer
Premium prismatic clear glass lens for uniform light
distribution, maximum light transmission, and wipe-down
Lens is reverse-angled to minimize perceived brightness from
normal viewing angles
Dimmable using fixture-mounted high/low/off rocker switch or
Rear-access cover and push-in electrical connectors for
quick installation using non-metallic cable or 3/8" flexible
Extra off-center knockouts and feed thru wiring capability
Captive external screws for quick mounting
Designer finishes include, brushed bronze, brushed silver
and white to match interior decor
xenon bi-pin high output lamps supplied with fixture.
Projected 10,000 hour life based on actual operating voltage in
Electronic 120 to 12-volt step down transformer is accessible
for maintenance without having to remove fixture.
aluminum. Designer white, brushed
brushed silver finish.
aluminum reflector behind each lamp.
prismatic tempered glass lens for maximum light transmission.
Reverse-angled to minimize perceived brightness. Captive lens
has hinged design for tool-less revamping. Spring-loaded
retention bar prevents lens from accidentally being bumped
integral Hi/Lo/Off rocker switch.
best results use dimmer specifically designed for use with
electronic low voltage transformers.
9" 1-Lamp Pro-Xenon. Supplied
with joiner connector, mounting hardware and (1) 12V 20W bi-pin
high output xenon lamp.
4-1/2"D x 1"H
INSTALLATION : UPX
series fixtures optimized with a center rear wiring access
compartment and push-in 3-wire electrical connectors for quick
electrical connection without having to open the fixture or
remove the lens. Rear wiring access compartment covers provided
with push-in connector for non-metallic cable and knockout for
feed thru wiring capability. Multiple off-center knockouts
provided in two, three and four lamp fixtures. Die-cast fitting
for 3/8" flexible metal conduit supplied in a hardware pack.
Fixtures may be mounted flush to the backsplash or up against
the front lip of the cabinetry using captive external mounting
install as a portable fixture, use the 3-wire grounded cord &
plug (ULH-CP sold separately).
Optional Direct Wire Optional
direct wire module (ULH-DWM sold separately) facilitates
code-compliant installation of fixture at front edge of
cabinetry. Supplied with 36" field-shortenable jumper cord to
bring power to either end of the fixture.
Electrically Connecting Multiple Fixtures Up
to 10 fixtures may be electrically joined together using either
the straight joiner connector supplied with each fixture or the
optional JC3 jumper cords. See accessories table for lengths and
input power (watts)
All Juno Lighting Products