Juno UPX214-BZ 14" Pro Xenon Brushed Bronze Undercabinet Light
Pro-Xenon modular series with integral electronic transformer operates 12-volt
halogen lamps to deliver the best color rendering with maximum light output and
lamp life. The efficient operation of low voltage lamps, along with a unique
housing/reflector system, reduces mounting surface temperatures well below what
is typical for xenon under cabinet fixtures. Pro-Xenon fixtures are optimized
for fast permanent installation, mounting either flush to the rear backsplash or
to the front lip of cabinetry to suit project conditions and homeowner
bi-pin high-output xenon lamp with 10,000 hours life
for installation flexibility
reflector increases light output and helps reduce fixture housing
- Slim 1"
12-volt electronic transformer
prismatic clear glass lens for uniform light distribution, maximum light
transmission, and wipe-down cleaning
- Lens is
reverse-angled to minimize perceived brightness from normal viewing angles
using fixture-mounted high/low/off rocker switch or wallmounted dimmers
cover and push-in electrical connectors for quick installation using
non-metallic cable or 3/8" flexible metal conduit
off-center knockouts and feed thru wiring capability
external screws for quick mounting
finishes include, brushed bronze, brushed silver and white to match interior
Lamp: 20W-12-volt xenon bi-pin high output lamps supplied with fixture.
Projected 10,000 hour life based on actual operating voltage in fixture.
Integral Electronic 120 to 12-volt
step down transformer is accessible for maintenance without having to remove
Extruded aluminum. Designer white,
or brushed silver finish.
Specular aluminum reflector behind each lamp.
Clear prismatic tempered glass lens for maximum light transmission.
Reverse-angled to minimize perceived brightness. Captive lens has hinged design
for tool-less revamping. Spring-loaded retention bar prevents lens from
accidentally being bumped loose.
Convenient integral Hi/Lo/Off
For best results use dimmer
specifically designed for use with electronic low voltage transformers.
14" 1-Lamp Pro-Xenon. Supplied with joiner connector, mounting hardware and (1)
12V 20W bi-pin high output xenon lamp.
14"L x 4-1/2"D x 1"H
: UPX series fixtures optimized with a center rear wiring access compartment
and push-in 3-wire electrical connectors for quick electrical connection without
having to open the fixture or remove the lens. Rear wiring access compartment
covers provided with push-in connector for non-metallic cable and knockout for
feed thru wiring capability. Multiple off-center knockouts provided in two,
three and four lamp fixtures. Die-cast fitting for 3/8" flexible metal conduit
supplied in a hardware pack. Fixtures may be mounted flush to the backsplash or
up against the front lip of the cabinetry using captive external mounting
To install as a portable fixture,
use the 3-wire grounded cord & plug (ULH-CP sold separately).
Direct Wire Optional direct
wire module (ULH-DWM sold separately) facilitates code-compliant installation of
fixture at front edge of cabinetry. Supplied with 36" field-shortenable jumper
cord to bring power to either end of the fixture.
Electrically Connecting Multiple Fixtures
Up to 10 fixtures may be electrically joined together using either the straight
joiner connector supplied with each fixture or the optional JC3 jumper cords.
See accessories table for lengths and finishes.
Total input power (watts)
Total Operating AMPS