Juno IC20LED-41K LED Recessed Lighting 5 inch New Construction IC Housing with Integral 14W LED driver 120V-277V 4100K color temp
- Dedicated LED, Air-Loc® sealed new construction housing with integral
- Can be completely covered with insulation
- Fully sealed housing stops infiltration and exfiltration of air,
reducing heating and air cooling costs without the use of additional gaskets
- LED housing is designed to provide 50,000 hours of life and is
compatible with many Juno trims
- No harmful ultraviolet or infrared wavelengths
- No lead or mercury
- Comparable light output to 65W BR30 incandescent while consuming 14W
LED Light Engine Cast aluminum heat sink integrated directly with
housing provides superior thermal management to ensure the long life of the LED
• Replaceable PC board with quick connector mounts directly to heat sink and
incorporates the latest generation of high lumen output LEDs binned to Energy
Star standards • 3000K, 3500K, or 4100K color temperatures available.
Optical System Computer-optimized internal reflector with specular finish
coupled with a high transmission diffusing lens conceals the LEDs and produces
uniform aperture luminance • Deep regression of lens produces a low glare,
efficient system that produces over 600 lumens using 14 watts of energy.
Aesthetic Trim Selections Compatible with wide selection of existing Juno
trims • Shadow free, knife edge design blends seamlessly into ceiling.
LED Driver Universal voltage driver accommodates input voltages from
to 277 volts AC at 60Hz • Power factor > 0.9 at 120V input • Driver has integral
thermal protection • Driver is dimmable with the use of Juno qualified 120V
electronic low voltage wall box dimmers • Mounted between the j-box and housing
for easy access and cool operation.
Life Rated for 50,000 hours at 70% lumen maintenance.
Labels UL listed for through-branch wiring, damp locations • Union made
AFL-CIO, UL and cUL, RoHS complaint.
Testing All reports are based on published industry procedures; field
performance may differ from laboratory performance.
Housing Designed for use in IC (insulated ceiling) or non-IC
construction • .032” aluminum housing sealed for Air-Loc compliance • Housing is
vertically adjustable to accommodate up
to a 1” ceiling thickness.
Junction Box Pre-wired junction box provided with (5) 1⁄2” and (1) 3⁄4”
knockouts and ground wire, UL listed and cUL listed for through-branch wiring,
maximum 8 No. 12 AWG 90° C branch circuit conductors (4 in, 4 out) • Junction
box provided with removable access plates • Knockouts equipped with pryout slots
• Push-in electrical connectors supplied as standard for fast, secure
Mounting Frame 22-gauge die-formed galvanized steel mounting frame •
Rough-in section (junction box, mounting frame, housing and bar hangers) fully
assembled for ease of installation.
Real Nail 3 Bar Hangers Telescoping, patent pending Real Nail 3 system
permits quick placement of housing anywhere within 24” O.C. joists or suspended
ceilings • Includes removable nail for repositioning of fixture in wood joist
construction • Integral T-bar notch and clip for suspended ceilings.
For specifications sheet,
click here - PDF
|For all Juno 5" LED Recessed Lighting
Housing & Trims, click on the