Juno Lighting ULH214-BZ 14 Pro-Halogen Brushed Bronze Under Cabinet Light
The Pro-Halogen modular series
with integral electronic transformer operates 12-volt halogen lamps to
deliver the best color rendering with maximum light output and lamp life.
The efficient operation of low voltage lamps, along with a unique
housing/reflector system, reduces mounting surface temperatures well below
what is typical for halogen under cabinet fixtures. Pro-Halogen fixtures are
optimized for fast permanent installation, mounting either flush to the rear
backsplash or to the front lip of cabinetry to suit project conditions and
- 12-volt halogen lamps for max. efficiency, best color quality, long 6,000+ hour lamp life
- Modular system for installation flexibility
- Maximum cabinet bottom
contact temperature: less than 60¡ C.
- Integral reflector increases
light output and helps reduce fixture housing temperature
- Slim 1" profile
- Premium prismatic clear glass
lens for uniform light distribution, maximum light transmission, and
- Lens is reverse-angled to
minimize perceived brightness from normal viewing angles
- Dimmable using
fixture-mounted high/low/off rocker switch or wall-mounted dimmers
- Rear-access cover and push-in
electrical connectors for quick installation using non-metallic cable or
3/8" flexible metal conduit
- Extra off-center knockouts
and feed thru wiring capability
- Captive external screws for
- Designer finishes include
black, brushed bronze, brushed silver and white to match interior decor
Lamp: 20W-12-volt halogen bi-pin lamps supplied with fixture . Projected 6,000
hour life based on actual operating voltage in fixture.
Transformer: Integral Electronic 120 to 12-volt step down transformer is
accessible for maintenance without having to remove fixture.
Housing: Extruded aluminum. Designer white, black, brushed bronze or brushed
Reflector: Specular aluminum reflector behind each lamp.
Diffuser: Clear prismatic tempered glass lens for maximum light transmission .
Reverse-angled to minimize perceived brightness. Captive lens has hinged design
for tool-less relamping. Spring-loaded retention bar prevents lens from
accidentally being bumped loose.
Switch: Convenient integral Hi/Lo/Off rocker switch.
Dimming: For best results use dimmer specifically designed for use with
electronic low voltage transformers.
Labels: UL Listed.
Supplied with joiner connector, mounting hardware and (1) T3 12V 20W bi-pin
9-1/2"L x 4-1/2"D x 1"H
ULH series fixtures optimized with a center rear wiring access compartment and
push-in 3-wire electrical connectors for quick electrical connection without
having to open the fixture or remove the lens. Rear wiring access compartment
covers provided with push-in connector for non-metallic cable and knockout for
feed thru wiring capability. Multiple off-center knockouts provided in two,
three and four lamp fixtures. Die-cast fitting for 3/8" flexible metal conduit
supplied in a hardware pack. Fixtures may be mounted flush to the backsplash or
up against the front lip of the cabinetry using captive external mounting
Portable: To install as a portable fixture, use the 3-wire grounded cord & plug
(ULH-CP sold separately).
Optional Direct Wire: Optional direct wire module (ULH-DWM sold separately)
facilitates code-compliant installation of fixture at front edge of cabinetry.
Supplied with 36" field-shorten-able jumper cord to bring power to either end of
Electrically Connecting Multiple Fixtures: Up to 10 fixtures may be electrically
joined together using either the straight joiner connector supplied with each
fixture or the optional JC3 jumper cords. See accessories table for lengths and
|Total input power (watts)
|Total Operating AMP
Juno Recessed Lighting
Juno Track Lighting
All Juno Lighting Products