Intermatic In-Wall Timer Mechanical 24 Hour Timer - Intermatic E1010, E1020
These heavy duty timers can be used to turn on lights, fans, pumps and other
heavy duty loads for energy savings, security and convenience. The timer is
designed to mount to any standard junction box for replacing a wall switch.
Models are available in single ON / OFF or multiple ON / OFF type. Both models
have an easy to use manual override.
Model E1010 equipped with a 24 hour dial divided in half-hour increments with a
permanently attached "ON" and "OFF" tripper permitting single "ON / OFF" control
every 24 hours. Model E1020 equipped with a multiple program dial. The dial
accommodates 12 "ON" and 12 "OFF" trippers. Furnished with two "ON" and two
"OFF" trippers. Both timers have three color code leads and require a hot,
neutral and one side of the load.
- Size 4-1/4 (10.8 cm) High, 3-1/4 (9.5 cm) Wide, 1-3/8 (3.5 cm) Deep
- Switch Rating 120 VAC 60 Hz; 1440 Watts Tungsten; 12 Full load Amps.; 15 Amp
- Timing Cycle Minimum ON time 1/2 hour, maximum ON time 22-1/2 hours;
Minimum time between any two "ON" trippers (and any two "OFF" trippers) is 2