Halo Track Light L642SL Power Trac 8 feet Two Circuit track ,Silver
Halo-2 Power-Trac system provides
two separate 20 AMP circuits. Each circuit can be independently switched.
Provides maximum flexibility, with a miniature profile. Suitable for a wide
range of commercial, merchandising and residential applications. Electrical
capacity is 20 AMPS per circuit when properly balanced. Installing lamp holders
is simple. An adjustable contact allows selection of the circuit position. Lift
or lower the contact until it touches the plastic stop of the assembly. For
circuit #1 move contact to the down position. For circuit #2 move contact to the
up position. Halo 2-Circuit Track accepts both Halo and Lazer-by-Halo lamp
holders. Silver, 8 ft. length.
aluminum .060" [1.5mm] nominal wall thickness. Halo-2 Power-Trac is
11/16”(17.5mm) deep by 1-3/8” (35mm) wide. Same as Halo Miniature
copper bus bars cross section equivalent to #12 AWG wire. Encased in
rigid extruded PVC insulators.
extruded polyvinyl insulators.
independent grounding bus conductor. Maintains an independent
positive ground #12 AWG path between lampholder, Trac channel and
section equivalent of #12 AWG wire.
polarity groove indicates proper electrical installation of
lampholder adapter. All Halo-2 Power-Trac is shipped from the
factory with a “LEFT” dead end installed. The L941 Live End
Connector is designed to attach to the right hand side of the track.
Locate small polarity indicator on the connector and align with
polarity groove on track.
listed for use with Halo and Lazer-by-Halo lampholders.
Halo Standard Track Fixture Heads Click
Halo Single Circuit Track
Parts and Accessories
SPECIFICATIONS -- PDF
INSTALLATION GUIDE -- PDF
Due to the fragile nature of this material (8' long track), buying insurance is
highly recommended. 8' Track is susceptible to bending and/or breakage while in