HALO H36ICAT 3 inch Line Voltage Shallow Ceiling IC Air Tight Recessed Lighting Housing
Click to Enlarge
HALO H36ICAT 3 inch Line Voltage Shallow Ceiling Recessed Lighting Housing
:IC AIR-TITE™ fixture for use with H3 3" series trims. Housing is
AIR-TITE with supplied gasket and prevents airflow between heated or air
conditioned spaces and unconditioned attic areas. For use with 120V GU10
lamps. H36ICAT is IC rated and may be used in insulated ceilings and be
covered with insulation material. Fits 2 x 6 joist construction
Housing : IC and AIR-TITE™rated double wall aluminum construction.
Plaster Frame :Housing adjusts in plaster frame to accommodate up to 1-1/2" ceiling
thickness. Galvanized steel construction.
Plaster frame features include:
Regressed locking screw for securing hanger bars.
Cutouts for easily crimping hanger bars in position.
Halo name embossed on plaster frame. The housing may be removed from
plaster frame to provide access to the junction box.
Junction Box :
UL Listed for through branch circuit wiring (maximum 8 No.12 ga., 90°C
Four 1/2" trade size conduit knockouts with true pry-out slots are
positioned to accommodate straight conduit runs.
Three Slide-N-Side™ wire traps allow non-metallic sheathed cable to be
installed without tools and without removing knockouts. Accepts a wide
range of non-metallic sheathed cable.
- Allows wiring connections to be made outside the junction box
- Simply insert the cable directly into the trap after connections are
- Accommodates the following standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
Got NAIL!™ Bar Hangers
Pre-installed nail easily installs in regular lumber, engineered
lumber and laminated beams.
Safety and guidance system prevents snagging, ensures smooth straight
nail penetration and allows bar hangers to be easily removed if
Automatic levelling flange aligns the housing and lets you hold the
housing in place with one hand while driving nails.
Housing can be positioned at any point within 24" joist span
Pass-N-Thru™ feature allows bar hangers to be shortened without
removing from plaster frame.
Score lines allow "tooless" shortening for 12" joists.
Bar hangers may be repositioned 90°.
Integral T-bar clip snaps onto T-bars - no additional clips required.
Socket: GU10 socket for 120V GU10 lamps.
Damp Location Listed>
UL listed for Feed Through
UL listed for Direct Contact with Insulation and combustible material