Fluke 123 Portable ScopeMeter, Dual Input 20 MHz digital oscilloscope, true RMS digital multimeter, Includes Alligator Clips, BNC Adapter, Test Leads and Battery Charger

The compact ScopeMeter 120 Series is the rugged solution for industrial troubleshooting and installation applications. It's a truly integrated test tool, with oscilloscope, multimeter and paperless recorder in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems.

The ScopeMeter 125 also features Bus Health Test for industrial bus systems and has power measurement capabilities.

As simple as one-two-three

The confidence to do a better job
Working under time pressure and in cramped or difficult-to-reach locations means you want to focus on the job at hand, not on the test tool in your hand. That's why the ScopeMeter 120 Series has Connect-and-View automatic triggering. You don't have to worry about triggering and instrument settings and you have all the information on screen to do the job right.

 Scope users know how difficult triggering can be. Incorrect settings show unstable and sometimes incorrect results. Fluke's unique Connect-and-View recognizes signal patterns and automatically sets up correct triggering. It provides a stable, reliable and repeatable display of virtually any signal, including motor drive and control signals, without touching a button. Signal changes are instantly recognized and settings adjusted for a stable display. Benefit from the speed and convenience when measuring a number of test-points in quick succession.

Use TrendPlot to help find intermittents, fast
The toughest faults to find are those that happen only once in a while intermittents. They can be caused by bad connections, dust, dirt, corrosion or simply broken wiring or connectors. Other factors, like line outages and sags or the starting and stopping of a motor, can also cause a machine to stop. You may not be around to see it your Fluke ScopeMeter will. In this paperless recorder mode, you can plot the minimum and maximum peak values and average over time up to 16 days. The two inputs can plot any combination of volts, amps, temperature, frequency and phase with time and date stamp to help lead you to the cause of those faults quickly.

Floating measurements, safety certified
While conventional oscilloscopes can only make measurements referenced to power line ground, the Fluke 120 Series makes floating measurements so there's no risk of an accidental ground short circuit when making a connection. The Fluke ScopeMeter 120 Series test tools and the included shielded test leads are safety certified for measurements on 600 V CAT III industrial power systems. Using the VPS40 probe, measurements up to 1000 V CAT II are fully supported.

Additional features of the Fluke 125

Bus Health mode allows for an analysis of the signal quality on industrial network, comparing measured signals to the standards’ signal requirements

Fluke 125 is the ScopeMeter of choice for the maintenance engineer who deals with industrial machinery and the industrial network connecting his machinery the like. The Fluke 125 has all the functionality of the 124 plus it comes with the following extensions:

• Bus Health mode gives a clear “Good” / “Bad” indication for the electrical signals on industrial buses and networks, such as CAN-bus, Profi-bus, RS-232 and many more. The Fluke 125 validates the quality of the electrical signals as soon as any electrical signals are passed along the network. It checks the signal levels and speed, transition times and distortion, and compares these to the appropriate standards to help you find errors like improper cable connections and terminators. It helps you find the source of error in case communication comes to a halt. All the commonly found industrial network types are supported!
• Power Measurements for single phase and balanced 3-phase systems. The Fluke 125 can directly present you the Total Power (Watts), Apparent Power (VA), Reactive Power (VAR) and the Power Factor (PF), over a wide range of applied frequencies, including those seen with motor drives and inverters. As a result, you are able to easily see the effects on the various power measurements during start-up or under changing operational conditions. A current clamp is included as a standard.
• Harmonics mode graphically displays harmonics up to the 33rd harmonic to assist in fault-finding, e.g. with large non-linear loads.
• RPM and Hz reading for use with electrical and combustion engines.
• Vac pwm for use on motor drive outputs, reading the true output voltage experienced by the motor itself.
• Low impedance measurements giving a 0.01 ohms resolution for motor windings and the like.

Fluke Tester Related Items
Electrical Tester	Clamp-On Meters	Multimeter Tester	Thermometer Tester	Power Tools	Insulation Tester	Portable Oscilloscopes	Fluke Accessories

Related Items