HACKER SAFE certified sites prevent over 99.9% of hacker crime.                    free-tax         
Home > Electrical Testers, Tools, and More > Fluke Tester > Fluke Tester Clamp-On Meters > Fluke 355 Clamp-On Meter Electrical Tester, High Current 2000A

Fluke 355 Clamp-On Meter Electrical Tester, High Current 2000A, True RMS, High Voltage, Frequency, Ohms, Continuity Tester with Backlit LCD Display and Carrying Case

Fluke 355 Clamp-On Meter Electrical Tester, High Current 2000AClick to Enlarge
Fluke 355 Clamp-On Meter Electrical Tester, High Current 2000A
Item# Fluke-355
$854.99
Availability: In Stock
Quantity: 

Product Description

Fluke 355 Clamp-On Meter Electrical Tester, High Current 2000A, True RMS, High Voltage, Frequency, Ohms, Continuity Tester with Backlit LCD Display and Carrying Case

High current and a large jaw, make these clamps well suited for industrial and utility applications.

Confidently take reliable readings with the true-rms, Fluke 355/353 Clamp Meters; the tools of choice for high-current measurements
up to 2000 A. The extra-wide jaw easily clamps around large conductors typically found in highcurrent applications. The rugged design and CAT IV 600 V, CAT III 1000 V ratings, add an extra element of protection when taking high-powered measurements.

Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this the most versatile tool for utilities, electrical contractors, and industrial service technicians.

  • Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc.
  • The large 58 mm (2.3 in) jaw capacity is suitable for large, or multiple conductors.
  • CAT IV 600 V, CAT III 1000 V rating for added user protection.
  • In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability.
  • High voltage measurement of 1000 V ac + dc true-rms, 600 V ac, and 1000 V dc allows users to perform multiple tests with only one tool (355 only).
  • Resistance to 400 kW coupled with a continuity beeper, provide the convenience of a multimeter (355 only).
  • Accurately measure frequency up to 1 kHz for optimum troubleshooting.
  • Quickly analyze readings using the MIN, MAX, and AVG functions.
  • A large backlit display allows for easy visibility in low-lit areas.
  • Use the display hold feature to capture readings even when the display cannot be viewed.
  • Use the low-pass filter to smooth out noisy loads and stabilize readings.

Specifications

Electrical specifications

Current measurement dc and ac 10 Hz to 100 Hz

Range Resolution Accuracy, A
40 A 10 mA 1.5 % rdg + 15 digits
400 A 100 mA 1.5 % rdg + 5 digits
2000 A; 1400 ac rms 1 A 1.5 % rdg + 5 digits

Crest Factor (50/60 Hz)

Range Crest Factor*
40 A 2 @ 33 A, 2.4 @ 27 A
400 A 2 @ 330 A, 2.4 @ 270 A
2000 A; 1400 ac rms 2 @ 1000 A, 2.4 @ 833 A

*Add 2 % to error spec for CF > 2

Current measurement ac 100.1 Hz to 1 kHz

Range Resolution Accuracy > 10 A
40 A 10 mA 3.5 % rdg + 15 digits
400 A 100 mA 3.5 % rdg + 5 digits
2000 A; 1400 ac rms 1 A 3.5 % rdg + 5 digits

Voltage measurement (355 only) dc and ac 10 Hz to 100 Hz
600 V and 1000 V ranges have 10 % over range to 660 V and 1100 V respectively.

Range Resolution Accuracy
4 V 1 mV 1 % rdg + 10 digits
40 V 10 mV 1 % rdg + 5 digits
400 V 100 mV 1 % rdg + 5 digits
600 V ac rms 1 V 1 % rdg + 5 digits
1000 V dc 1 V 1 % rdg + 5 digits

Voltage measurement (355 only) ac 100.1 Hz to 1 kHz
600 V and 1000 V ranges have 10 % over range to 660 V and 1100 V respectively.

Range Resolution Accuracy
4 V 1 mV 1 % rdg + 10 digits
40 V 10 mV 1 % rdg + 5 digits
400 V 100 mV 1 % rdg + 5 digits
600 V ac rms 1 V 1 % rdg + 5 digits

Ohms measurement (355 only)

Range Resolution Accuracy
400 Ω 0.1 Ω 1.5 % + 5 digits
4 kΩ 1 Ω 1.5 % + 5 digits
40 kΩ 10 Ω 1.5 % + 5 digits
400 kΩ 100 Ω 1.5 % + 5 digits

General specifications

Measurement range 5.0 Hz to 1 kHz
Resolution 0.1 Hz (15 Hz to 399.9 Hz); 1 Hz (400 Hz to 1 kHz)
Accuracy – 5.0 Hz to 100 Hz 0.2 % + 2 counts
Accuracy – 100.1 Hz to 1 kHz 0.5 % + 5 counts
Trigger level Refer to current and voltage tables
Batteries Six 1.5 V AA NEDA 15 A or IEC LR6
Battery life (with typical usage, backlight off) 100 hours
Test leads Rated to 1000 V
Weight .814 kg (1.8 lb)
Jaw size 58 mm (2.28 in)
Dimensions (LxWxD) 300 mm x 98 mm x 52 mm (12 in x 3.75 in x 2 in)
Safety rating IEC 61010-2-032, 600 V CAT IV, 1000 V CAT III
Operating temperature 32 °F to + 122 °F (0 °C to +50 °C)
Storage temperature -4 °F to 140 °F (-20 °C to +60 °C)
Operating humidity 0 to 95 % (non-condensing)
Operating altitude 2000 m
Storage altitude 10,000 m
IP rating 42 (indoor use only)
Drop test requirements 1 m
EMI, RFI, EMC FCC part 15, IEC/EN 61326-1:1997 class B, IEC/EN
61326:1997 3V/m, performance criteria B, EN61325
Temperature coefficients Current: 0.1 % of reading per °C outside 22 °C to 24 °C
Voltage: 0.1 % of reading per °C outside 22 °C to 24 °C
Fluke Tester Related Items
Fluke Electrical Tester
Electrical
Tester		 Fluke Clamp-On Meter Electrical Tester
Clamp-On
Meters		 Fluke Multimeter Electrical Tester
Multimeter
Tester		 Fluke Thermometers
Thermometer
Tester		 Fluke Power Quality Tools
Power
Tools		 Fluke Insulation Tester
Insulation
Tester		 Fluke Portable Oscilloscopes
Portable
Oscilloscopes		 Fluke Electrical Tester Accessories
Fluke
Accessories
Related Items
Fluke HVAC and Indoor Air Quality Fluke Thermal Imaging Fluke Earth Ground Tester
Fluke Distance Meters Fluke Process Calibration Tools Amprobe Tester by Fluke
  Fluke Product Catalog


 Company Information
 Contact Us
 Customer Reviews
 Security Certifications
 Line Card - PDF
  Customer Service
 Return Policy
 Shipping & Delivery Process
 Frequenty Asked Questions
 Price Match		  Coupons and Specials
 Promotional Coupons
 Free Ground Shipping
 Limited Time Offers
 Buyer Protection
Paypal Secure Checkout Security Verified Business Seal Trust Guard Certified Privacy Verified Seal