HACKER SAFE certified sites prevent over 99.9% of hacker crime.                    free-tax         

Fluke 124 Portable ScopeMeter, Dual Input 40 MHz digital oscilloscope, true RMS digital multimeter, Measure Frequency, Includes Alligator Clips, BNC Adapter, Test Leads and Battery Charger

Fluke 124 Portable ScopeMeter, Dual Input 40 MHz digital oscilloscope, true RMS digital multimeter, Includes Alligator ClipsClick to Enlarge
Fluke 124 Portable ScopeMeter, Dual Input 40 MHz digital oscilloscope, true RMS digital multimeter, Includes Alligator Clips
Item# Fluke-124
$1,736.95
Availability: In Stock
Quantity: 

Product Description

Fluke 124 Portable ScopeMeter, Dual Input 40 MHz digital oscilloscope, true RMS digital multimeter, Measure Frequency, Includes Alligator Clips, BNC Adapter, Test Leads and Battery Charger

The compact ScopeMeter 120 Series is the rugged solution for industrial troubleshooting and installation applications. It's a truly integrated test tool, with oscilloscope, multimeter and paperless recorder in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems.

The ScopeMeter 125 also features Bus Health Test for industrial bus systems and has power measurement capabilities.

  • Dual-input 40 MHz or 20 MHz digital oscilloscope
  • Two 5,000-count true-rms digital multimeters
  • A dual-input TrendPlot recorder
  • Connect-and-View trigger simplicity for hands-off operation
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • 10:1 Voltage Probe included with Fluke 124 for reduced circuit loading
  • Up to seven hours battery operation
  • 600 V CAT III safety certified
  • Optically isolated RS-232 interface
  • Rugged compact case

As simple as one-two-three

A three-in-one tool
ScopeMeter 120 Series combines a 40 or 20 MHz dual input digital storage oscilloscope, two true-rms digital multimeters and a dual input TrendPlotâ„¢ recorder all in a compact, battery powered instrument. Leave all other test tools behind because the ScopeMeter 120 Series test tool is the only one you'll need.



 

The confidence to do a better job
Working under time pressure and in cramped or difficult-to-reach locations means you want to focus on the job at hand, not on the test tool in your hand. That's why the ScopeMeter 120 Series has Connect-and-View automatic triggering. You don't have to worry about triggering and instrument settings and you have all the information on screen to do the job right.

 

 

 

 

 

Connect-and-View triggering for an instant, stable display

Scope users know how difficult triggering can be. Incorrect settings show unstable and sometimes incorrect results. Fluke's unique Connect-and-View recognizes signal patterns and automatically sets up correct triggering. It provides a stable, reliable and repeatable display of virtually any signal, including motor drive and control signals, without touching a button. Signal changes are instantly recognized and settings adjusted for a stable display. Benefit from the speed and convenience when measuring a number of test-points in quick succession.

 

One test lead measures all
High frequency waveform, meter, capacitance and resistance measurements as well as continuity checks are all covered by the shielded test leads. No time wasted finding or swapping leads. The included accessories allow hook-up at test objects of every dimension.


 

Use TrendPlot to help find intermittents, fast
The toughest faults to find are those that happen only once in a while intermittents. They can be caused by bad connections, dust, dirt, corrosion or simply broken wiring or connectors. Other factors, like line outages and sags or the starting and stopping of a motor, can also cause a machine to stop. You may not be around to see it your Fluke ScopeMeter will. In this paperless recorder mode, you can plot the minimum and maximum peak values and average over time up to 16 days. The two inputs can plot any combination of volts, amps, temperature, frequency and phase with time and date stamp to help lead you to the cause of those faults quickly.

 

 

 

 

Battery powered mobility Up to seven hours of battery operation frees you from mains outlets for true on-the-move working. The handheld format and the weight of just 1.2 kg make the instrument easy to carry and to fit comfortably in your hand. The rugged and drip proof case assures long life and reliable operation in the harshest industrial environments. (See technical specifications for details on battery life.)

Floating measurements, safety certified
While conventional oscilloscopes can only make measurements referenced to power line ground, the Fluke 120 Series makes floating measurements so there's no risk of an accidental ground short circuit when making a connection. The Fluke ScopeMeter 120 Series test tools and the included shielded test leads are safety certified for measurements on 600 V CAT III industrial power systems. Using the VPS40 probe, measurements up to 1000 V CAT II are fully supported.

Additional features of the Fluke 125

bushealth

 

 

 

 

 


 

Bus Health mode allows for an analysis of the signal quality on industrial network, comparing measured signals to the standards’ signal requirements

Fluke 125 is the ScopeMeter of choice for the maintenance engineer who deals with industrial machinery and the industrial network connecting his machinery the like. The Fluke 125 has all the functionality of the 124 plus it comes with the following extensions:

  • Bus Health mode gives a clear “Good” / “Bad” indication for the electrical signals on industrial buses and networks, such as CAN-bus, Profi-bus, RS-232 and many more. The Fluke 125 validates the quality of the electrical signals as soon as any electrical signals are passed along the network. It checks the signal levels and speed, transition times and distortion, and compares these to the appropriate standards to help you find errors like improper cable connections and terminators. It helps you find the source of error in case communication comes to a halt. All the commonly found industrial network types are supported!
  • Power Measurements for single phase and balanced 3-phase systems. The Fluke 125 can directly present you the Total Power (Watts), Apparent Power (VA), Reactive Power (VAR) and the Power Factor (PF), over a wide range of applied frequencies, including those seen with motor drives and inverters. As a result, you are able to easily see the effects on the various power measurements during start-up or under changing operational conditions. A current clamp is included as a standard.
  • Harmonics mode graphically displays harmonics up to the 33rd harmonic to assist in fault-finding, e.g. with large non-linear loads.
  • RPM and Hz reading for use with electrical and combustion engines.
  • Vac pwm for use on motor drive outputs, reading the true output voltage experienced by the motor itself.
  • Low impedance measurements giving a 0.01 ohms resolution for motor windings and the like.
Specifications
Oscilloscope Bandwidth 40 MHz
Dual input True RMS Meter Vdc, Vac, Vac+Vdc, Ohms,Continuity , Diode-test
Current, °C, °F, Capacitance, dBV, dBM, Crest Factor, Touch Hold and Zeroset
TrendPlot Recording Automatic vertical scaling and time compression.
Display the actual, MIN, MAX and AVG reading.
Cursors ∆T, 1/∆T, V, ∆V, rise- and fall time
Real-time sample rate 25 MS/s
Inputs and digitizers 2
Timebase range 20 ns - 1 min/div
Input sensitivity 5 mV - 500 V/div
Trigger types Connect-and-View™, Free Run, Single Shot, Edge, Video, External
Glitch capture 40 ns
Scope measurements Automatic: 26
Maximum record length 512 min/max pts per input
Memory 20 screens and setups
Environmental Specifications
Operating Temperature 0 ºC to 50 ºC
Storage Temperature -20 °C to +60 °C
Operating Altitude 3,000 m
Safety Specifications
Electrical Safety 600V CAT III (EN61010-1)
Mechanical & General Specifications
Size 232 x 115 x 50 mm
Weight 1.2 kg
Warranty 3 years parts and labor (one year on accessories)
Battery Life 7 hrs using NiMH
RS232 Interface Optically isolated via optional PM9080 or OC4USB for interfacing to Printer or PC
Fluke Tester Related Items
Fluke Electrical Tester
Electrical
Tester
Fluke Clamp-On Meter Electrical Tester
Clamp-On
Meters
Fluke Multimeter Electrical Tester
Multimeter
Tester
Fluke Thermometers
Thermometer
Tester
Fluke Power Quality Tools
Power
Tools
Fluke Insulation Tester
Insulation
Tester
Fluke Portable Oscilloscopes
Portable
Oscilloscopes
Fluke Electrical Tester Accessories
Fluke
Accessories
Related Items
Fluke HVAC and Indoor Air Quality Fluke Thermal Imaging Fluke Earth Ground Tester
Fluke Distance Meters Fluke Process Calibration Tools Amprobe Tester by Fluke
  Fluke Product Catalog


 Company Information
 Contact Us
 Customer Reviews
 Security Certifications
 Line Card - PDF
 Customer Service
 Return Policy
 Shipping & Delivery Process
 Frequenty Asked Questions
 Price Match
 Coupons and Specials
 Promotional Coupons
 Free Ground Shipping
 Limited Time Offers
 Buyer Protection

Paypal Secure Checkout Security Verified Business Seal Trust Guard Certified Privacy Verified Seal