Fantech PB270H-2 Premium Bath Inline Exhaust Fan Kit 270 CFM, 4" and 6" Ducts Dual Location Grilles with 2 x 50W Halogen Light
The key to proper ventilation in
oversized baths is spot ventilation at the source. As the trend to larger
spa-like bathrooms continues to gain in popularity, the need for proper
ventilation becomes more important. Quick removal of moisture at the source will
keep your beautiful bath free of mold and the effects of extreme moisture.
Fantech has developed its Premium Bath Fans so that one remote mounted fan motor
can effectively ventilate several areas of the bath. Ceiling Grilles or Ceiling
Grilles with Lights can be easily positioned over showers, whirlpool tubs, steam
showers, toilet and vanity.
Premium Bath Inline Exhaust Fan Kit Features:
- External rotor motor by
ebm-papst (German Made)
- Superior CFM at higher static
- 100% speed controllable
- Rated for continuous duty
- New Improved Ceiling Grille
Housing Simplifies Installation
- Improved Airtight Design
- Longer Quick-Connect Duct
- Hanger Bars Extend to 24" On
- Set Screw Locks Hanger Bars
- Key Hole Mounting Slots
- UL "Wet Location" Rating, IC "Insulation Contact"
- One Ceiling Grille and grille
housing with damper. Uses 4" duct and 6" duct.
Sheet - PDF
Installation Manual - PDF
|Fantech PB270H-2 Premium Bath
Inline Exhaust Fan Kit includes:
||Fantech PB270H-2 Bath Inline Exhaust Fan Kit is:
|(1) 270 CFM fan
(2) 6" Grilles w/ 50 Halogen Bulb
(2) Grille housings with dampers
(8) Hanger Bars
(1) Y-adapter (4x4x6)
(1) Fan Mounting Bracket
|FAN SIZING FOR BATHS OVER 100 SQ. FT.
Ventilation for baths over 100 square feet is calculated based on the
fixtures in the bath. Allow 50 CFM for each standard toilet, shower or
tub. Whirlpool and jetted tubs are calculated at 100 CFM. Add up the
CFMs for all fixtures for the total CFMs required.
11’ x 14’ Bath = 154 square feet
1 Jetted Tub
You will need a 200 CFM fan.
NOTE: Fantech recommends that steam showers use a separate fan on a
timer so that the fan may be shut off during shower use and then run
afterward to dry the shower stall.
Fantech Premium Bath Fans are "flex duct friendly" making
installation fast and easy.
duct. (Insulated flex duct allows sound
from the fan to dissipate gradually so that it can not be heard
in the bathroom.)
2. Ideally you should have at least 8 feet of flex duct between
ceiling grilles and fan.
3. If applicable, use multiple ceiling grilles or ceiling
grilles with lights.
|Did You Know?
For Improved Indoor Air Quality, HVI (Home Ventilating
Institute) recommends that the bath fan be left on for 20-minutes after
the use of the bathroom.
ASHRAE ( American Society of Heating, Refrigerating and Air Conditioning
Engineers) recommends that controls be installed on bath fans for low
level continuous or intermittent ventilation.
Programmable Controls can do all that and more!