Elco Lighting EL760ICA 6" LED Shallow New Construction IC Airtight
- IC Airtight for direct contact with
- Meets Title 24 requirements. ENERGY
- Trims and inserts sold separately.
- Shallow Single wall IC rated for direct contact
with insulation, for use in IC or non-IC conditions.
- Housing adjusts in frame to accommodate up to 1
1/4" ceiling thickness.
- Airtight housing with gasket to restrict airflow in
accordance with ASTM E-283 air-tight requirements.
- Steel housing for greater heat dissipation.
Stamped galvanized steel frame.
Installation: Designed for ceiling
plenums where 2x6 joists or taller joists are used. High strength hanger bars
can easilty be nailed to joists. Maximum hole cutout is 6 1/4". Suitatble for
T-grid and drop ceiling applications. See installation sheet for detailed
Junction Box: Positioned to accommodate
straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4"
knockouts. Pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars: Pre-installed hanger bars
with TrueNail facilitate easy installation in regular lumber, engineered lumber,
and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans
up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger
bar size reduction. Integral leveling flange allows for single-person
installation while aligning the housings with the joists.
- Input Voltage: 120V
Trims: Compatible with ELCO 6" LED
Dimmability: Dimmability based on lamp.
Designed for use with ELCO 6" LED inserts, LED
modules, or PSA37 with 6" MR16 trims.
Listings: UL Listed for Damp
Location/Wet Location with select trims. UL Listed for Feed Through. UL
Listed for Direct Contact with Insulation and Combustible Material. Airtight
per ASTM E-283. Install a JA8-2016-E lamp for Title 24 Compliance.
Warranty: ELCO Lighting warrants
products will be free from defects in materials and workmanship for a period of
For Specification Sheet,
Click Here - PDF