Features
• IC Airtight for direct contact with insulation
• Must be used with Architectural Koto LED Light Engines (ELK19 or ELK21 Series)
• Lumen output based on module
Construction
• Single Wall IC Rated for direct contact with insulation
• For use in IC and Non-IC conditions
• Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements
Installation
• Designed for ceiling plenums where 2x6 joists or taller are used
• Maximum hole cutout is 3 5/8"
Junction Box
• Positioned to accommodate straight conduit runs
• Seven 1/2" trade size conduit knockouts, four 3/4" knockouts
• Pry-out knockout slots
• 4 Romex pryouts with strain relief
Electrical
• Input Voltage: 120/277V
• High efficiency driver with power factor >0.9
Dimmability
• 0-10V/Triac/ELV
Listings
• UL Listed for Damp Location
• UL Listed for Wet Location with select trims
• UL Listed for Feed Through
• UL Listed for Direct Contact with Insulation and Combustible Material
• Airtight per ASTM E-283
• Install a JA8-2016-E lamp/luminaire for Title 24 Compliance
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• IC Airtight for direct contact with insulation
• Must be used with Architectural Koto LED Light Engines (ELK19 or ELK21 Series)
• Lumen output based on module
Construction
• Single Wall IC Rated for direct contact with insulation
• For use in IC and Non-IC conditions
• Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements
Installation
• Designed for ceiling plenums where 2x6 joists or taller are used
• Maximum hole cutout is 3 5/8"
Junction Box
• Positioned to accommodate straight conduit runs
• Seven 1/2" trade size conduit knockouts, four 3/4" knockouts
• Pry-out knockout slots
• 4 Romex pryouts with strain relief
Electrical
• Input Voltage: 120/277V
• High efficiency driver with power factor >0.9
Dimmability
• 0-10V/Triac/ELV
Listings
• UL Listed for Damp Location
• UL Listed for Wet Location with select trims
• UL Listed for Feed Through
• UL Listed for Direct Contact with Insulation and Combustible Material
• Airtight per ASTM E-283
• Install a JA8-2016-E lamp/luminaire for Title 24 Compliance
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
