The Com-Pak^TM Twin Plus : The Economical Choice For Larger Areas: Cadet Heater CSTC402TW, Cadet Heater CSTC302TW, Cadet Heater CST402, Cadet Heater CST302, Cadet Heater CST408, Cadet Heater CST402T, Cadet Heater CST302T, Cadet Heater CST408T, Cadet Heater "Com-Pak twin Plus" Accessories

General Information:
The Com-Pak Twin Plus is the ideal choice for heating large areas such as an open foyer with a single heater. Twin heaters connected behind a single grill provide all the benefits of The Com-Pak Plus. Cadet recommends a wall-mounted thermostat for optimum performance, or you may prefer the convenience of an optional built-in thermostat.

Architectural Information:
Fan forced electric air heaters shall be UL Listed, factory rated at 208V or dual field rated from 208V to 240V. A painted 20 gauge wall mounting can with four knockouts and 79 cubic inch wiring compartment shall be provided with each complete heater. Each complete heater shall be of unitized construction and attach to the wall can with two screws and shall be self-contained and completely separate from the wall mounting can. The elements and blowers shall be of unitized construction and attach to wall can with a single screw. Two elements shall be of nichrome type wrapped on mica insulators with two oversized 25 amp at 240V high temperature manual reset limit switches and two over temperature thermal backups. Two independent two-stage centrifugal blowers shall be driven by impedance protected motors. The motors shall be totally isolated from the heating chamber. Metal grill shall be of one piece, 20 gauge construction and finished with a powder coat paint system.

Technical Information:
Model may be ordered with or without built-in thermostat. For optimum comfort use a Cadet electronic thermostat or a dual diaphragm thermostat. Single pole and double pole field mount thermostat kits available. Fan heaters and thermostats work best when installed on an inside wall. UL requires heater to be placed a minimum distance of 6" from adjacent surfaces and 4.5" from the floor. Manufacturer recommends installation 12" from all surfaces. A 3' (91.44cm) minimum clearance is recommended for furniture or other objects placed directly in front of heater.