ARK Lighting ARLV-4000 Mini-Housing Low Voltage Recessed Lighting

Miniature housing for use with all 4000 series trims. Use this housing when space is an issue. At just 4" high, this housing fits where other housings will not. For use with all 4000 series trims. Easy snap-in Installation. The trims that accompany the 4000 series housings are rated for 35 watt maximum lamps and must use a Class 2 Installation. This Housing must have a 3" clearance around and above it. ETL Listed, made in the U.S.A.

Overall Diameter: 3 1/2"
Inside Diameter: 2 3/4"
Ceiling Cut-Out" 2 7/8" Diameter
Height = 4"

Typical Low Voltage Lighting Installation (Class 2 Wiring). Please read
Single Transformer	Single transformer	Single Transformer
One small transformer feeds one fixture	One large transformer feeds many fixtures in series	One large transformer feeds many fixtures in split

Note: This fixture requires 12 volt transformer and Class 2 Wiring installation.
All ARK ARLV-4000 series housings are rated for 35W Max.
3" Clearance on all sides and above required when insulation is present.
1" Clearance on all sides and above when no insulation is present.

For a complete unit, refer to the table below
ARK 4000 Housing	+	ARK Frame (Optional)	+	ARK 4000 Trims	+	Low Voltage Transformers	=	Complete Unit