The SL Series :  The ideal choice for large areas with limited wall space

Features and Benefits :

• Manual reset thermal protection

• Commercial grade high temperature manual reset with 25 amp rating at 240 Volt

• Grill design provides even air distribution

• Powder coat paint process eliminates sharp metal edges

• Fan provides quiet operation

• Built-in double pole thermostat

• 2 Year Warranty

General Information:
The SL Series is a high performance fan heater for small to medium areas. A unique fan reduces air turbulence, allowing The SL Series to deliver heat quietly, and dual warm exhausts provide even, efficient distribution of heat. The grill louvers are designed to conceal the internal components from view. Also included is an adjustable automatic quick-action thermostat control for your comfort and convenience.


Architectural Information:
Fan forced electric air heaters shall be UL Listed, factory rated at 120V, 208V, and dual field rated from 208V to 240V. A  painted 22  gauge wall mounting can with 2 knockouts and 70 cubic inch wiring compartment shall be provided with each heating unit. The elements and blower shall be of unitized construction and attach to wall can with 4 screws. Elements shall be of nickel chrome type with an oversized 25 amp at 240V high temperature manual reset limit switch. Blowers delivering approximately 65 CFM shall be driven by an impedance protected motor. The motor shall be totally isolated from the heating chamber. Metal grill shall be of one piece, 22 gauge construction and finished with a powder coat paint system.


Technical Information:
Model comes with a built-in double pole thermostat. Fan heaters and thermostats work best when installed on an inside wall. UL requires heater to be placed a minimum distance of 6" from adjacent surfaces and 6" from the floor. Manufacturer recommends installation 12" from all surfaces. A 3-foot (91.44cm) minimum clearance is recommended for furniture or other objects placed directly in front of heater.

NOTE: Manufacturer recommends installing heater assembly after walls are finished. Heater must be cleaned every six months minimum.


Rough In Dimensions:
15.375W x 10.75H x 4D
Wall Can Dimensions:
14.125W x 10H x 4D
Grill Dimensions:16.75W x 12.875H