Marley UH724 Industrial Unit Heater 7500W, 25,598 BTU/Hr 240V
include primary, supplementary or auxiliary heat source in factories, stores,
warehouses, public buildings, service stations, workshops, large or exposed
areas or additions.
Marley UH724 Features:
and contactor coils are 240 volt and operate on the secondary of a
factory-installed step-down power transformer on 480 and 600 volt heaters so a
separate fan and motor control power source is not needed.
are copper brazed to low watt density, steel-sheathed tubular heating
elements. Fins and elements are arranged in a uniform grid pattern and fit
closely into the air discharge area to assure that all incoming air passes
through the heating element. Element is finished with aluminized paint for
corrosion resistance. Uniform discharge of all heated air lowers internal
operating temperatures and prolongs element life.
cutout automatically shuts off current in the event of overheating and
reactivates the heater when temperature returns to normal.
5kW and 7.5kW
heaters can be used in horizontal or vertical position. Heaters come equipped
with ceiling mounting bracket for horizontal or vertical flow mounting or any
position in between.
finish. Cabinet is finished with an epoxy coating for excellent corrosion
resistance. The finished color is neutral grey.
7.5 KW, 25,598
Mounting height: 6
ft. minimum, 8 ft. maximum
30 lbs ship weight