Monaco 6002A is a small scale, adjustable HID inground illuminator for use with
metal halide PAR lamps and AR111 halogen lamps. It includes the Venterra
heat & water management system, insuring years of uninterrupted performance.
Lumiere's exclusive Beam-Driver aiming system provides up to 15° tilt and 360°
rotation of the lamp beam. This allows precision aiming without disturbing the sealed lamp module or
looking into the energized lamp source. Beam-Driver
operates using a conventional cordless drill or screwdriver. The adjustment
mechanisms are concealed securely beneath the trim ring when not in use. Fixture
includes lamp, factory-installed in a waterproof lamp module.
||Recessed housing and side mounted wiring compartment are constructed
from corrosion proof, injection molded polycarbonate. Trim ring is
constructed from corrosion resistant brass or stainless steel.
||Painted trim rings are constructed from solid cast brass and double
protected by a chemical conversion undercoating and polyester powdercoat
paint finish, surpassing the rigorous demands of the outdoor
environment. A variety of standard colors are available. Machined
natural brass or stainless steel trim rings are unpainted to reveal the
natural beauty of the material and are available in either round or
square forms (for square, specify option -SQ). Brass will patina
naturally over time.
||Domed 1/2" thick tempered glass lens, factory sealed with high
temperature adhesive to prevent water intrusion. Suitable for drive-over
applications to 5000 lbs. when option -DSB is specified. An internal
temperature reduction lens is available to reduce outer lens
temperatures even further (specify option -TRL).
||Reflector is constructed from spun aluminum,
clear anodized with Alzak® finish.
||Stainless steel hardware is standard to provide maximum
corrosion-resistance. Outer trim ring includes captive fasteners.
||PAR20, PAR30L & PAR38: Ceramic socket with 250° C Teflon® coated
lead wires and medium base.
|LABELS & APPROVALS:
||UL and cUL listed, standard wet label. IP68 rated. Manufactured to
ISO 9001-2000 Quality Systems Standard. IBEW union made.
||Fixture includes integral core & coil ballast assembly
(120/208/240/277/347V). Rated for minimum -30° C starting temperature.
Ballast assembly is encapsulated in UL-approved waterproof potting
material. Electronic ballasts can be specified for any wattage. Core and
coil ballasts for 175W are no longer available, and must now be
specified with electronic ballasts only (specify option -EL).
||Included as standard. Lamp is factory-installed in sealed lamp
module. Specify spot (SP), flood (FL), or wide flood (WFL) lamp
distribution. Note WFL available only with PAR38 lamps. MH175PAR38 only
available with WFL distribution.