Carmel 403 is an ultra-compact low voltage halogen fixture. It utilizes a T4
halogen lamp source and specular pebblestone aluminum reflector for high lumen
output and even illumination. The adjustable mounting stem provides a full range
of aiming from any mounting position. Lumiere's exclusive Siphon Protection
System (S.P.S.) prevents water from siphoning into the fixture through its own
||Housing, hood and mounting stem are precision-machined from
corrosion-resistant 6061-T6 aluminum billet, brass, or copper. Mounting
ring is die-cast zinc with brass mounting collar, both finished to match
housing and hood.
||Fixtures are double protected by a chromate conversion undercoating
and polyester powdercoat paint finish, surpassing the rigorous demands
of the outdoor environment. A variety of standard colors are available.
|HIGH OUTPUT REFLECTOR:
||Specular pebblestone aluminum reflector is standard to provide high
lumen output and even illumination.
||Housing and hood are sealed with a high temperature silicone o-ring
gasket to prevent water intrusion.
||Tempered glass lens, factory seals with high temperature adhesive to
prevent water intrusion and breakage due to thermal shock.
||Adjustable mounting stem with 1/2" NPS threaded male fitting
provides a full range of aiming from any mounting position. Stainless
steel aim-locking mechanisms are standard. Lumiere's exclusive Siphon
Protection system (S.P.S.) prevents water from siphoning into the
fixture through its own lead wires. Optional mounting arms are also
||Stainless steel hardware is standard to provide maximum
||Ceramic socket with 250° C TeflonŽ coated lead wires and GY6.35
||Remote 12V transformer required (not included). Available from
Lumiere as an accessory.
||Not included. Available from Lumiere as an accessory.
||UL and cUL listed, standard wet label. IP65
rated. Manufactured to ISO 9001-2000 Quality Systems Standard. IBEW
union made. Approved by New York City Dept. of Buildings, Bureau of
Electrical Control for use in NYC, NY.