Home
> Lutron Fluorescent Dimming Ballast
> Lutron Eco-10 10% Fluorescent
Dimming Ballasts Lutron Fluorescent Dimming
Ballasts Eco-10 10%
To maximize the benefits of a
lighting management system, use Eco-10 dimming ballasts by Lutron. Eco-10 offers
100% to 10% dimming, and is ideal for use in any space where saving energy is
the primary goal, and critical performance is secondary.
Eco-10 ballasts are available for a large range of lamps, making them an ideal
choice for applications with many different fixture types. In addition, Eco-10
ballasts are fully compatible with Lutron's complete line of 3-wire fluorescent
controls.The choice for
economical wide area workplace dimming down to 10%
Lutron Eco-10 IR Ballast with Built-In
Dimmer
(Click here
to view products)
- Ideal for both new
construction and existing applications
- Works seamlessly with
digital microWATT, RadioTouch, and other Lutron lighting controls to provide
central lighting control and energy management capabilities
- Low-profile ballast
size expands the possibility for individual control to additional fixture
types
- 1-lamp and 2-lamp models
available for 32W, T8 lamps (277V)
Lutron Eco-10 for T5 Linear Lamps
(Click here
to view products)
- Dims T5 linear to 10%
- Slim profile design --
just 1" high
- 3-wire line voltage
control
- Color-keyed push-in
connectors
Lutron Eco-10 for T8 Linear and T5
Twin-tube Lamps
(Click here
to view products)
- Dim T8 linear and T5
twin tube lamps to 10%
- 3-wire line voltage control
Performance
- Continuous, flicker-free
dimming from 100% to 10%
- 3-wire line voltage control
for consistent fixture-to-fixture dimming
- Lamps turn on at any dimmed
level without flashing to full brightness
- Low harmonic distortion
- Slim-profile design
- 100% performance tested
- Ultra-quiet operation
- Designed and assembled in the
USA
- 5-year warranty (limited)
with field service commissioning (3-year warranty standard)
Specifications
- Lighting management dimming
from 100% to 10% relative light output
- No visible flicker
- Total Harmonic Distortion (THD)
less than 20%
- Power factor greater than .95
- Ballast factor greater than
.85 for T8 lamps and T5 twin-tube lamps
- Ballast factor equal to 1.0
for T5 and T5-HO lamps
- Frequency of operation
greater than 25 kHz for T8 lamps and T5 twin-tube lamps
- Frequency of operation
greater than 42 kHz for T5 and T5-HO lamps
- Inaudible in 27 dBA ambient
environment
- Inrush current limiting
circuitry built-in (maximum of 7 amps for 120V and 3 amps at 277v)
- Internal fusing
- Minimum lamp starting
temperature 10°C (50°F)
- Maximum ballast case
temperature 75°C (167°F)
|
