Kim Lighting LTV753/WW/150HAL120 120V 150W T4 Halogen, 9" Diameter Wall Wash Inground Well Landscape Lighting, Bronze Housing and Lens Ring
Lens Ring: One-piece cast bronze, natural finish.
Eight captive 5/16" blackened stainless steel hex-socket cap screws.
Lens: Clear tempered borosilicate glass, 5/16" thick, flush with lens
ring flange, slighty crowned.
Lens Gasket: One-piece molded silicone, U-channel wraps completely around
Bronze Housing: Two-piece cast bronze, 3/16" min. wall thickness upper and lower
housing continuously soldered together. No top lip to trap dirt and moisture.
Separate splice and ballast compartments, individual cast aluminum internal
covers with one-piece molded silicone gaskets. Two 3/4" NPT in bottom of 24 cu
in. splice area. Modular reverse draft housing design (top smaller than largest
Optical System: SP and NF - Spot or narrow flood spun aluminum
reflector, specular Alzak, black Duranodic are tube glare shield on SP only. PR
- for PAR38 reflector lamps, or PAR36 and AR111 12V lamps in LTV54 only. All
sockets 4KV medium base. All optical systems yoke mounted, 360deg rotation,
adjustment, locking screws, black anodized gimbal ring. WW - one-piece
hydroformed reflector, specular Alzak, 360deg rotation and screw locks, Wall
wash distribution, medium base 4KV socket for H.I.D. lamps. Mini-can socket
halogen lamps. PL - GX24q-3 universal socket is provided for fluorescent.
Electrical Module: High power factor ballast, -20degF starting, factory
mounted and prewired to gasketed compartment cover, LTV50 and LTV52 only.
Wiring: Anti-siphon barriers on all wiring to and from ballast compartment. All
components wired linked for ground, quick-disconnect for removal of optical
Drive-over Durability: When installed in concrete, fixture will withstand
drive-over by vehicles weighing up to 5,500 lb.
For dimensions and specification sheet,
click here - PDF.
For Kim Lighting color chart,
For More Kim Landscape Lighting Products,
Click on the Pictures Below