Kim Lighting LTV23/WW/250HAL120 120V 250W T4 Halogen, Wall Wash Inground Well Landscape Lighting, Composite Housing, Bronze Lens Ring
Lens Ring: One-piece cast bronze, natural finish.
(Optional standard stainless steel lens ring is also available.) Eight captive
5/16" blackened stainless steel hex-socket cap screws.
Lens: Clear tempered borosilicate glass, 5/16" thick, flush with lens
ring, slightly crowned.
Lens Gasket: One-piece molded silicone, U-channel wraps completely around lens
Composite Housing: High temperature, compression molded, fiberglass impregnated,
3/16" min. Wall composite. Charcoal gray. No top lip to trap dirt and moisture.
Solid brass knurled insterts molded-in to receive lens ring screws.
Separate splice and ballast gaskets. Two 3/4" NPT in bottom, 33 cu in. splice
area. Modular reverse draft design (top dia. smaller than bottom), body and
ballast modules epoxy bonded.
Optical System: WW - One-piece hydroformed reflector, specular
Alzak, black lower shield towards viewers, 360deg rotation and screw locks, wall
wash distribution. Medium base 4KV socket for HID lamps, mini-can socket for
halogen lamps. (G12 base socket option available.) PL - GX24q-3 universal socket
is provided for fluorescent.
Electrical Module: High power factor ballast, -20degF starting, factory mounted
and prewired to gasketed compartment cover, LTV22 only.
Wiring: Anti-siphon barriers on all wiring to and from ballast compartment. All
components wired linked for ground, quick-disconnect for removal of optical
Drive-over Durability: When installed in concrete, fixture will withstand
drive-over by vehicles weighing up to 5,500 lb.
For dimensions and specification sheet,
click here - PDF.
For Kim Lighting color chart,
For More Kim Landscape Lighting Products,
Click on the Pictures Below