Home
>
Recessed Lighting >
Juno Recessed Lighting
>
Juno Lighting 4" Low Voltage Recessed
Cans > Juno TC44V 4 inch Low Voltage Non IC Standard Recessed Lighting Housing
with 277V to 12V 50VA magnetic transformer
Description
Non-IC rated low voltage housing
Designed to be installed in non-insulated areas, or where insulation is spaced
at least 3" from housing
Features
- 4" Housing
- Ceramic bi-pin socket with
aluminum heat shield
- Housing is vertically
adjustable to accommodate up to a 1 1/4" ceiling thickness
- Steel housing is fully
assembled for ease of installation
- 120V to 12V 50VA thermally
protected magnetic transformer
- May be dimmed using dimmers
specifically designed for magnetic transformers
- Real Nail™ 3 bar hangers:
telescoping system with pre-installed removable nail for easy repositioning
of housing in joist construction
- Integral T-bar clip for
secure installation in suspended ceilings
- Patented breakaway bars for
tight joist spacing
- Bar hangers may be
re-positioned 90º
- Curved foot facilitates
alignment with joist bottom
- Quick-Loc slot and oversized
set screw lock fixture in position
- Pre-wired junction box with
(5) 1/2" and (1) 3/4" knockouts with pryout slots, (4) Romex™ connectors,
and ground wire
- Shadow-free, knife-edge trim
design blends smoothly into the ceiling and allows architectural continuity
with Aculux™ trims
- UL Listed, C-UL/CSA certified
for through-branch wiring, maximum (8) #12 AWG minimum 90° C branch circuit
conductors (4 in, 4 out)
- Thermally protected against
improper use of lamps or insulation
- MR16 lamp wattage ratings
based on trim selection
Listings
UL Listed, C-UL/CSA certified for
through-branch wiring, damp and wet locations
- Wet location listed with
trims 441, 4401, 4402 and 4481
- Conforms with City of Chicago
IP requirements
|
