Home
>
Recessed Lighting >
Juno Recessed Lighting
>
Juno Lighting 5" Compact Fluorescent
Recessed Cans > Juno PL513EU Recessed Lighting 5 inch Compact Fluorescent
CFL non IC Standard Housing 13W with Electronic Ballast for 4-pin lamp
Description
Vertical CFL housing with single wall construction
Designed to be installed in non-insulated areas, or where insulation is spaced
at least 3" from housing
Features
- 5"
Housing
- Ballast
PL513EU: 120V through 277V HPF rapid start electronic ballast with
end-of-life lamp protection. Ballast mounted on J-box cover
PL513: 120V NPF magnetic. Ballast mounted on inside of housing
-
Removable or fixed mounted socket accommodate a variety of trim
installations
-
Vertically adjustable to accommodate up to a 1" ceiling thickness
- Real
Nail™ 3 bar hangers: telescoping system with pre-installed removable nail
for easy repositioning of housing in joist construction
- Integral
T-bar clip for secure installation in suspended ceilings
- Patented
breakaway bars for tight joist spacing
- Bar
hangers may be re-positioned 90º
- Curved
foot facilitates alignment with joist bottom
-
Quick-Loc slot and oversized set screw lock fixture in position
- Fully
assembled housing
-
Pre-wired junction box with (5) 1/2" and (1) 3/4" knockouts with pryout
slots, (4) Romex™ connectors, and ground wire
- UL
Listed, C-UL/CSA certified for through-branch wiring, maximum (8) #12 AWG
conductors (4 in, 4 out)
-
Shadow-free, knife-edge trim design blends smoothly into the ceiling and
allows architectural continuity with Aculux™ trims
- One 13W
quad or triple tube CFL lamp. PL513 requires a 2-pin lamp; PL513EU requires
a 4-pin lamp.
Listings
- UL
Listed, C-UL/CSA certified for through-branch wiring, damp and wet locations
- Wet
location listed when used with a 210 trim
|
