Home
>
Recessed Lighting >
Juno Recessed Lighting
> Juno Lighting 4" Line Voltage Recessed Cans
>
Juno TC1 4 inch Line Voltage non IC
Standard Recessed Lighting Housing
Description
Non-IC rated housing
Designed to be installed in non-insulated areas, or where insulation is spaced
at least 3" from housing
Features
- 4"
Housing
-
Detachable medium base porcelain socket with nickel-plated copper screw
shell
- Housing
is vertically adjustable to accommodate up to a 1 1/4" ceiling thickness
- Steel
housing is fully assembled for ease of installation
- Real
Nail™ 3 bar hangers: telescoping system with pre-installed removable nail
for easy repositioning of housing in joist construction
- Integral
T-bar clip for secure installation in suspended ceilings
- Patented
breakaway bars for tight joist spacing
- Bar
hangers may be re-positioned 90º
- Curved
foot facilitates alignment with joist bottom
-
Quick-Loc slot and oversized set screw lock fixture in position
-
Pre-wired junction box with (5) 1/2" and (1) 3/4" knockouts with pryout
slots, (4) Romex™ connectors, and ground wire
-
Shadow-free, knife-edge trim design blends smoothly into the ceiling and
allows architectural continuity with Aculux™ trims
- UL
Listed, C-UL/CSA certified for through-branch wiring, maximum (8) #12 AWG
minimum 90° C branch circuit conductors (4 in, 4 out)
-
Thermally protected against improper use of lamps or insulation
- Lamp
wattage ratings and apertures based on trim selection
Listings
UL Listed,
C-UL/CSA certified for through-branch wiring, damp and wet locations
- Wet
location listed with trims 11, 12, 4101, 4102 and 4181
- Wet
location listed with trims 14 and 17 with PAR20 outdoor rated lamps
- Conforms
with City of Chicago IP requirements
|
