 |
L1651–4'
(1219mm) Recessed Channel.
Size : Recessed Power-Trac Housing is 1 17/32" (39mm) deep with a 3
3/8" (86mm) wide flange area.
Finish : Available in white. |
|
|
L1652–8' (2438mm) Recessed Channel.
Size : Recessed Power-Trac Housing is 1 17/32" (39mm) deep
with a 3 3/8" (86mm) wide flange area.
Finish : Available in white. |
 |
L1901P Live End Connector Housing
To start a run. L901 or L941 required to complete installation.
Finish: White (P) |
 |
L1903P Straight Connector and Housing
Connect two Miniature Power-Trac sections end to-end.
Finish: White (P) |
|
|
L1943P To connect two Halo-2 Power-Trac
sections end-to-end.
Finish: White (P)
|
 |
L1904P L Connector Housing
To connect two track sections at 90° angle.L904 or L943
required to complete installation.
Finish: White (P)
|
 |
L1905P T Connector Housing
To connect three track sections into a T configuration. L905, L945R
or L945L required to complete installation. |
 |
L1906P X Connector Housing
To connect four track sections into a cross configuration. L906 or
L946 required to complete installation.
Finish: White (P) |
 |
L930P Housing End Cap
For symmetry of installation at end of run.
Finish: White (P) |
 |
L932 Cross Tee Adapter Clip
Use in track housing groove to assemble 15/16" cross tee. For use
with Chicago Metallic 200 System, National Rolling Mills ML System, Donn
Corporation DX System. |
 |
L934 Cross Tee Adapter Clip
Use in track housing
groove to assemble 9/16" cross tee. For use with Chicago Metallic Tempra
4000 System, National Rolling Mills SLK System, Donn Corporation
Centricities System. |
 |
L935 Recessed Housing Hanger
Use to suspend Recessed Power-Trac Housing. |
 |
L937 Raceway Cover
Cover allows Recessed Housing to be used as Raceway to carry up to 6
#12 AWG wires. 4' lengths. One cover is required for each raceway
channel.
|
 |
L938 Cross Tee End
For use when cross tee is cut. Pop rivet to cross tee and insert
into L932, L934 cross tee adapter. |
 |
L939 Lathing Tab
Use to suspend Recessed Power-Trac Housing to carrying channel (10"
long). |
 |
L940 Mini Connector Kit
Contains two joiner strips and hardware. For recessed
channel when using L908 or L949. |
