 |
L611–4' Track.
Actual length 44 1/8" (1121mm).
Finish: White (L611P), Black (L611MB)
|
|
|
L612–8'
Track.
Actual length 92 1/8" (2340mm).
Finish: White (L612P), Black (L612MB)
|
|
|
L613–12'
Track.
Actual length 140 1/8" (3559mm).
Finish: White (L613P), Black (L613MB)
|
 |
L900 Outlet Box Cover
Can be used at any electrical feed connection point
(Live, Straight, L, T or X). Size: 5" sq. Screws included.
Finishes: White (L900P), Black (L900MB) |
 |
L911 Live End Connector
To start a run.
Finishes: White (L911P), Black (L911MB) |
 |
L913 Straight Connector
To connect two track sections end-to-end. May be used as
feed point.
Finishes: White (L913P), Black (L913MB) |
 |
L914L L Connector
To connect two track sections at left-hand 90° angle.
Outside ground. May be used as feed point.
Finishes: White (L914LP), Black (L914LMB)
|
 |
L914R L Connector
To connect two track sections at a right-hand 90° angle.
Inside ground. May be used as feed point.
Finishes: White (L914RP), Black (L914RMB)
|
 |
L915L T Connector
To connect three track sections into a left-hand T configuration.
Grounds matched to L915R for grid system. May be used as feed point.
Finishes: White (L915LP), Black (L915LMB) |
 |
L915R T Connector
To connect three track sections into a right-hand T
configuration. Grounds matched to L915L for grid system. May be used as
feed point.
Finishes: White (L915RP), Black (L915RMB) |
 |
L916 X Connector
To connect four track sections into a cross
configuration. May be used as feed point.
Finishes: White (L916P), Black (L916MB) |
 |
L981 Conduit Adapter
Designed to accept standard 1/2" trade size
conduit fitting (not supplied). Use when feeding to surface mount Raceway trac through surface conduit system.
Finishes: White (L981P), Black (L981MB)
|
 |
L984 T-Bar Attachment Clip
Allows surface mount Raceway Trac to be attached to inverted tee
ceiling. Order as follows: 2 kits for 2' Trac; 2 kits for 4' Trac;
3 kits for 8' Trac and 4 kits for 12' Trac. |
 |
L994 45° Pendant Adapter
For installing pendant mounted Power-Trac on sloped
ceiling. For use with L992 and L993.
Finishes: White (L994P), Black (L994MB) |
 |
L993 Pendant Kit Assembly
To suspend track from ceiling. Order as follows:2 kits
for 2' Trac ; 2 kits for 4' Trac ; 3 kits for 8' Trac; and 4 kits for
12' Trac. Includes one 18" threaded steel stem, canopy and
mounting hardware.
Finishes: White (L993P), Black (L993MB) |
|
|
L48 48" Steel Stem
For additional length L993 can be field cut and
threaded.
Finishes: White (L48P), Black (L48MB)
|
