This item has been discontinued by the manufacturer. Please
click here for
Halo Lighting EL405835 4" LED Recessed Light Energy Saving LED module 14W Comparable to 65W Incandescent/Halogen or 18W Compact Fluorescent 3500K Color Temp
The Halo LED EL4058xx Light Engines are designed for use in the LED dedicated housing Series H455x. Halo
LED H4 Series light engines deliver in the range of 534-700 lumens (depending upon the trim and selected color
temperature); and the H4 Series offers a selection of four color temperatures: 2700K, 3000K, 3500K, 4000K.
Halo LED offers a superior optical design that yields productive beam lumens, good cutoff and low glare.
534 - 700 lumens (depending upon color temperature and trim selected)
Halo LED offers the widest choice of four correlated color temperatures in
recessed LED downlighting: 2700บK, 3000บK, 3500บK, 4000บK
Lumen Maintenance 70% lumens / 50,000 hours
Up to 50 Lumens per Watt
LED package consisting of an engineered conglomeration of multiple LEDs to
create one virtual source, for a productive cone of light
Designed for interchangeable trim choices, with selection from multiple
reflector and lens trim options
H4 LED Light Engines exceed ENERGY STARฎ Qualification when used with
designated LED trims*
Can be used to meet State of California Title 24 2008 and International Energy
Conservation Code IECC 2009 High Efficacy requirements when used with
designated LED trims*
LED emits no ultraviolet and only minimal infrared wavelengths
(A) Upper Heat Sink
Durable extruded aluminum construction.
Conducts heat away from the LED keeping the junction temperatures below
specified maximums, even when installed in insulated ceiling environments.
(B) Lower Heat Sink
Durable die-cast aluminum construction.
Precision keyed flange designed to lock with matching keyed slots in H4 trim
Works in conjunction with the upper heat sink for heat conduction away from
(C) Friction Blades
Precision formed stainless steel spring blades provide retention of the EL
series of light engines in the H455 series housings.
Friction blade design allows the light engine to be installed in any position
within the housing aperture (360 degrees).
Tether security cable included on the light engine for attachment to the
housing during installation, as recommended and when required by code.
(D) LED Connection
LED connector is a non-screw base connector offering easy installation with
the EL4 Series LED Light Engine.
LED connector meets California Title-24 high-efficacy luminaire requirement
for a non-screw base socket, and where required to qualify as a high-efficacy
Specification Sheet - PDF
Halo LED Brochure - PDF
Installation instruction - PDF