Designed for sloped ceiling
installations for ceilings from 2/12 to
6/12 pitch. The socket aiming
mechanism allows
the lamp to be aimed straight down
regardless of ceiling pitch. H47ICAT
is sealed and gasketed to limit
airflow between plenum and heated
or air conditioned areas.
Housing Features
Integral thermal protector guards
against improper lamping.
Double wall housing construction.
Door in outer housing allows
junction box access from below
ceiling.
Exclusive socket aiming
mechanism swivels and rotates to
properly align lamp. Slope
indicator provides
quick and consistent lamp settings
(factory set for 3/12 slope).
Junction Box Features include:
UL listed for through branch
circuit wiring
Positioned to accommodate
straight conduit runs
Seven 1/2" trade size conduit
knockouts with true pry-out
slots
Slide-N-Side connectors allow
14/2 or 12/2 non-metallic
sheathed cable to be installed
without tools and without
removing knockouts.
Bar Hanger Features include:
Pre-installed, captive
Housing can be positioned at
any point within 24" joist span
Score lines allow "tooless"
shortening for 12" joists
Bar hangers may be
repositioned 90°
Pass-N-Thru bar hangers
overlap for toolless shortening to
less than 12".
Unique arrowhead design
provides rapid installation.
Hanger bars fit onto T-bar spline
for quick alignment
Installation Features
7 1/8 Height allows use in 2x 8
construction.
One piece seamless baffle
presents a clean finished
appearance.
Listings
UL Listed for Damp Location
UL listed for Feed Through
UL listed for Direct Contact with
Insulation and combustible
material
CSA Certified
State of California Title 24
H47ICAT also meets the following
requirements:
Washington State Energy Code
International Energy
Conservation Code (IECC)
New York State Energy
Conservation Construction Code
(NY-ECCC)
Model Energy Code (MEC)
Certified Under ASTM-E283
 |
