DESCRIPTION
IC AIR-TITE fixture for use with H3 3" series trims. Housing is
AIR-TITE with supplied gasket and prevents airflow between
heated or air conditioned spaces and unconditioned attic areas.
For use with 12V MR16 lamps.
H38LVICAT is IC rated and may be used in insulated ceilings and
be covered with insulation material.
Housing
IC and AIR-TITE rated double
wall aluminum construction.
Plaster Frame
Housing adjusts in plaster frame
to accommodate up to 1-1/2"
ceiling thickness. Galvanized
steel construction.
Plaster frame features include:
Regressed locking screw for
securing hanger bars.
Cutouts for easily crimping
hanger bars in position.
Halo name embossed on
plaster frame. The housing
may be removed from plaster
frame to provide access to the
junction box.
Junction Box
UL Listed for through branch
circuit wiring (4 No. 12ga.,
90°C conductors).
Four 1/2" trade size conduit
knockouts with true pry-out
slots are positioned to
accommodate straight
conduit runs.
Three Slide-N-Side wire
traps allow non-metallic
sheathed cable to be installed
without tools and without
removing knockouts. Accepts
a wide range of non-metallic
sheathed cable.
- Allows wiring connections to
be made outside the junction
box
- Simply insert the cable
directly into the trap after
connections are made.
- Accommodates the following
standard non-metallic
sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
Got NAIL! Bar Hangers
Pre-installed nail easily installs
in regular lumber, engineered
lumber and laminated beams.
Safety and guidance system
prevents snagging, ensures
smooth straight nail
penetration and allows bar
hangers to be easily removed
if necessary.
Automatic levelling flange
aligns the housing and lets you
hold the housing in place with
one hand while driving nails.
Housing can be positioned at
any point within 24" joist span
Pass-N-Thru feature allows
bar hangers to be shortened
without removing from plaster frame.
Score lines allow "tooless"
shortening for 12" joists.
Bar hangers may be
repositioned 90°.
Integral T-bar clip snaps onto
T-bars - no additional clips
required.
Transformer
Integral transformer steps 120V
line voltage down to 12V lamp
operating voltage.
Socket
GU5.3 socket for 12V MR16
lamps.
Labels
UL/cUL Listed
Damp Location Listed
UL listed for Feed Through
UL listed for Direct Contact
with Insulation and combustible
material
Meets following requirements:
State of California Title 24
Washington State Energy Code
International Energy
Conservation Code (IECC)
New York State Energy
Conservation Construction
Code
Certified Under ASTM-E283
 |
