DESCRIPTION
:Non-IC AIR-TITE fixture for use with H3 3" series trims. Housing is
AIR-TITE with supplied gasket and prevents airflow between heated or air
conditioned spaces and unconditioned attic areas. For use with 120V GU10
lamps. Non-IC Housing is AIR-TITE but insulation must be kept 3 away
from all sides of housing.
Housing: Formed of 20 gauge CRS with white powder coat finish.
Plaster Frame: Housing adjusts in plaster frame to accommodate up to 1-1/2" ceiling
thickness. Galvanized steel construction.
Plaster frame features include:
Regressed locking screw for securing hanger bars.
Cutouts for easily crimping hanger bars in position.
Halo name embossed on plaster frame. The housing may be removed from
plaster frame to provide access to the junction box.
Junction Box
UL Listed for through branch circuit wiring (maximum 8 No.12 ga., 90°C
conductors).
Four 1/2" trade size conduit knockouts with true pry-out slots are
positioned to accommodate straight conduit runs.
Three Slide-N-Side wire traps allow non-metallic sheathed cable to be
installed without tools and without removing knockouts. Accepts a wide
range of non-metallic sheathed cable.
- Allows wiring connections to be made outside the junction box
- Simply insert the cable directly into the trap after connections are
made.
- Accommodates the following standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
Got NAIL! Bar Hangers
Pre-installed nail easily installs in regular lumber, engineered
lumber and laminated beams.
Safety and guidance system prevents snagging, ensures smooth straight
nail penetration and allows bar hangers to be easily removed if
necessary.
Automatic levelling flange aligns the housing and lets you hold the
housing in place with one hand while driving nails.
Housing can be positioned at any point within 24" joist span
Pass-N-Thru feature allows bar hangers to be shortened without
removing from plaster frame.
Score lines allow "tooless" shortening for 12" joists.
Bar hangers may be repositioned 90°.
Integral T-bar clip snaps onto T-bars - no additional clips required.
Socket: GU10 socket for 120V GU10 lamps.
Labels
UL/cUL Listed
Damp Location Listed
Listed for Feed Through
Certified Under ASTM-E283 for air tight construction
 |
