 |
L621–4' Trac. Actual length 42 7/8" (1089mm).
Finishes: White (L621P), Black (L621MB) |
|
|
L622–8' Trac. Actual length 90 7/8"
(2308mm).
Finishes: White (L622P), Black (L622MB)
|
|
|
L623–12'
Trac.
Actual length 138 7/8" (3527mm).
Finishes: White (L623P), Black (L623MB)
|
 |
L900 Outlet Box Cover
Can be used at any electrical feed connection point (Live, Straight,
L, T or X). Size: 5" sq. Screws included.
Finishes: White (L900P), Black (L900MB) |
 |
L921 Live End Connector
To start a run.
Finishes: White (L921P), Black (L921MB) |
 |
L923 Straight Connector
To connect two track sections end-to-end. May be used as
feed point.
Finishes: White (L923P), Black (L923MB) |
 |
L924 L Connector
Connects two track sections at a right angle. May be
used as feed point.
Finishes: White (L924P), Black (L924MB) |
 |
L925 T Connector
To connect three track sections into a T Configuration.
May be used as feed point.
Finishes: White (L925P), Black (L925MB) |
 |
L926 X Connector
To connect four track sections into a cross configuration. May be
used as feed point.
Finishes: White (L926P), Black (L926MB) |
 |
L954 Pendant Kit
To suspend track from the ceiling. Order as follows: 2
kits for 2' Trac; 2 kits for 4' Trac; 3 kits for 8' Trac; 4
kits for 12' Trac. 18" threaded steel stem, one canopy and
mounting hardware.
Finishes: White (L954P), Black (L954MB) |
 |
L963 Single-Circuit to Four- Circuit Convertor with
Switch
Allows any Halo Power-Trac lampholder (except solid state low
voltage and L3218, L3232, L3239, L5120, L5130, L5138) to be used with
Four Circuit Trac. One converter is required for each Power-Trac
lampholder used. This adapter is designed to fit into the trac in either
of two directions. Facing in one direction, it makes contact with
circuits 1 and 2, with a 3-position switch (on-off-on) used to select
the desired circuit. To connect the fixture ith circuits 3 or 4,
the adapter is removed from the trac, turned 180°, and is then
re-inserted into the trac. L963 is rated at 500 watts maximum.
Finishes: White (L963P), Black (L963MB) |
 |
L982 Conduit Connector
A Live End Connector for use with surface conduit. Designed to
accept standard 3/4" trade size conduit fitting (not supplied).
Finishes: White (L982P), Black (L982MB) |
 |
L983 T-Bar Attachment Clip
Allows track to be attached to inverted tee ceiling. Order as
follows: 2 kits for 2' Trac; 2 kits for 4' Trac; 3 kits
for 8' Trac and 4 kits for 12' Trac.
Finishes: White (L983P), Black (L983MB) |
