 |
Halo L641 Power Trac Two CircuitHalo-2 Power-Trac is only
11/16" (17.5mm) deep by 1 3/8" (35mm) wide.
L641 -4' Track. Actual Length
42 5/8"(1083 mm)
Finishes
: White (L641P),
Black (L641MB)
, Silver (L641S)
|
|
|
Halo L642
Power Trac Two Circuit
Halo-2 Power-Trac is only
11/16" (17.5mm) deep by 1 3/8" (35mm) wide
L642 -8' Track. Actual Length
90 5/8"(2302 mm)
Finishes :
White (L642P),
Black (L642MB)
, Silver (L642S)
|
|
|
Halo L643
Power Trac Two Circuit
Halo-2 Power-Trac is only
11/16" (17.5mm) deep by 1 3/8" (35mm) wide
L643 -12' Track. Actual
Length 138 5/8"(3521 mm)
Finishes : White (L643P),
Black (L643MB)
, Silver (L643S)
|
 |
L900 Outlet Box Cover
Can be used at any electrical feed connection point
Live, Straight, L, T or X. Drill guides on back for virtually all
standard outlet boxes. Size: 5" sq. Screws included.
Finish : White (L900P), Black (L900MB)
|
 |
L941 Live End Connector
To start a run. Right hand polarity. Left hand polarity
live end connector available. Consult factory.
Finish: White (L941P), Black (L941MB)
|
 |
L942 Flex Joiner
To connect two track sections at any angle up to 90,° in
either plane or wall to ceiling or pitched ceiling applications.
Finish: White (L942P) , Black (L942MB)
|
 |
L943 Straight/L Connector
To connect two track sections end-to-end or at a 90°
angle. May be used as feed point.
Finish: White (L943P)
, Black (L943MB)
|
 |
L945R Right T Connector
"T" connector for joining three trac sections with right hand polarity. May be used as feed point.
Finish: White (L945RP) , Black (L945RMB)
|
|
|
L945L Left T Connector
"T" connector for joining three trac sections with left
hand polarity. May be used as feed point.
Finish: White (L945LP) , Black (L945LMB)
|
 |
L946 X Connector
To connect four track section into a cross
configuration. May be used for feed point.
Finish: White (L946P) , Black
(L946MB)
|
 |
L947 Conduit Connector
A live end connector for use with surface conduit. Designed to
accept standard 1/2" conduit fitting not included. May be used for feed
point.
Finish: White (L947P) , Black (L947MB) |
 |
L949 Mini Joiner
To join two straight track sections end-to-end .Not a feed point.
Finish: White
(L949P) , Black
(L949MB) |
 |
L951 Wire Way Cover for Pendant Assembly Kit
For track to be wired through stem (one for each live end used). Shown with end feed and pendant stem kit–order separately
Finish:L951P (White),
L951MB (Black)
|
 |
L983 T-Bar Attachment Clip
Allows track to be attached to inverted tee ceiling.
Order as follows: 2 kits for 4' Trac; 3 kits for 8' Trac and 4 kits for
12' Trac.
|
|
|
L986 Mini-T Bar Clip
For mounting Trac on suspended ceilings with mini-grid
(9/16" wide) system.
|
 |
L989 Conduit Continuation Kit
Includes one left and one right feed. To continue a run around obstructions with 1/2" trade size surface conduit.
Finish: White (L989P), Black (L989MB)
|
 |
L929 Floating Canopy and Connector
Can be connected anywhere along length of Trac. Comes
with canopy cover, connector, dead-end and mounting hardware.
Finish: White (L929P), Black (L929MB)
|
 |
L994 Pendant Adapter
For installing pendant mounted Power-Trac on sloped ceiling. For use with L992.
Finish: White (L994P) , Black (L994MB)
|
 |
L992 Pendant Kit Assembly
To suspend track from ceiling. Order as follows: 2 kits
for 4' Trac; 3 kits for 8' Trac; and 4 kits for 12' Trac. Includes one 18" threaded steel stem, canopy and mounting hardware.
Finish: White (L992P) , Black (L992MB)
|
|
|
L48 48" Steel Stem
For additional length of stem for L992. Can be field cut and threaded.
|
