Fluke Electronics
Fluke 867B Graphical Multimeter
|
Fluke
867B Graphical MultiMeter The Fluke 867B is the ultimate
handheld tool for any application that demands real precision. Its 0.025%
basic accuracy makes the 867B GMM tool an excellent choice for critical
measurements. The 867B delivers the ultimate combination of functions and
accuracy available in one handheld tool. |
Features
at a Glance:
Waveform Display to 1 MHz
- Safety-rated to 1000V
- Digital Display/Counts
- Selectable True-rms or Average Sensing
- Continuity/Conductance/Capacitance
- Duty Cycle/Pulse Width/Period/Frequency
- Min/Max/Average with Time Stamp
- Relative Mode
- Touch Hold® and Peak Hold
- dB, AutoDiodeâ„¢
- Auto/Manual Ranging, Smoothingâ„¢
- RS232 Interface (software and cable optional)
- Logic Activity
- Component Test
- LCD backlight
- Waveform memory
- Built-in NiCad charging
- Battery Eliminator
The Fluke 867B GMM Gives
You the Big Picture
- 0.025% basic dc accuracy to discriminate low-level signal variations
in transducers and analog electronics.
- Direct current from 0 to 10 Amps, with resolution down to 10nA
- True-rms ac with bandwidth to 300 kHz
- Capacitance from 40pF to 10,000 µF
- Measure dB gain or loss in amplifiers, filters, or attenuators
- Tested for IEC 1010-1, CAT III 1000 Volts for industrial distribution
systems
- And more: AutoDiodeâ„¢, TouchHold®, Smoothingâ„¢,
Relative, Peak Hold, Auto/Manual Ranging
- RS-232 Interface for communication to computers and printers. Import
waveforms into reports (software and cable optional).
Six test
tools in one
Here's one test tool that's six test tools in one:
Fluke's most accurate Multimeter,
from the company that makes the best multimeters in the world. With
Fluke's guaranteed ruggedness and reliability.
Easy-to-use Waveform Display from
dc to 1 MHz. Troubleshooting no longer means groping in the dark.
Waveforms are like x-ray pictures of your electrical system. With
automatic set-up you get the best view without fiddling with timebase,
trigger levels, position, etc.
A Recorder that plots high
resolution meter readings in intervals from 1 second to 15 minutes. Record
your data in one of three modes-sample, high/low or average. With the
RS-232 interface, you can connect to your computer using FlukeView
software and collect as much data as your hard disk can accommodate
(software and cable optional).
Component Test for checking
voltage-current signatures on resistors, capacitors, semiconductors and
more.
Logic Test offers a simple way to
indicate logic transitions to 10 MHz, showing if a circuit is active,
stuck high, or stuck low.
A Frequency Counter that measures
up to 10 MHz.
Display
Combo mode shows combined meter and and waveform displays
for quick check of distorted waveforms.
Record events and trends. Helpful for
troubleshooting intermittent problems or profiling loads.
Glitch Capture displays voltage
impulses (spikes) which can effect data communications and electronic
equipment.
|
|
Specifications |
|
VDC |
Measurement Range: 300.00 mV to 1000.0V
Basic Accuracy: ±0.025%
|
|
VAC RMS |
Measurement Range: 300.00 mV to 1000.0V
Basic Accuracy: ±0.5%
Bandwidth: 20 Hz to 300 Khz
AVG Bandwidth: 50 Hz to 30 Khz
|
|
ADC |
Measurement Range: 300.00 µA to 10.000A
Basic Accuracy: ±0.05% to 0.2% N/A
|
|
AAC |
Measurement Range: 300.00 µA to 10.000A
Basic Accuracy: ±0.75% N/A
|
|
Resistance |
Measurement Range: 300.00 Ohm to 30.000 MOhm
Basic Accuracy: ±0.07%
|
|
Frequency |
Measurement Range: 2 Hz to 2 MHz
Basic Accuracy: ±0.05% |
|
Capacitance |
Measurement Range: 10 nF to 10,000 µF
Basic Accuracy: ±1.90%
|
|
Waveform
Display |
1 MHz |
|
Peak Hold |
Captures
positive and negative peaks ³ 10 µs |
|
Glitch
Capture |
Captures
glitches ³ 1 µs |
|
dB/dBm |
Measurement Range: 2, 4, 8, 16, 50, 75, 93, 110, 125, 135, 150, 300,
600, 900, 1000, 1200 Ohm references
Basic Accuracy: ±0.05dB
|
|
General Specifications |
|
Safety
Rating |
IEC 1010-1
Category III for 1000V; UL 3111, CSA-C22.2 No. 1010-1-92, TUV, ENG1010-1 |
|
Display |
LCD, dot
matrix, 240x200 pixels |
|
Operating
Temperature |
0°C to
50°C |
|
Storage
Temperature |
-20°C to
60°C (batteries removed) |
|
Relative
Humidity |
0% to 90%
non-condensing |
|
Battery
Life |
NiCad
battery pack: 8 hrs (supplied with 867B)
Alkaline (6AA): 6 hrs |
|
Size |
2.75" H x
5.4" W x 9.7" L
69.9 mm H x 137.2 mm W x 246.4 mm L |
|
Weight |
With battery
pack: 3.01 lb (1.35 kg)
With AA batteries: 2.64 lb (1.19 kg) |
Users Manual - PDF
|
