Fluke 16 Multimeter with Thermometer

Fluke Electronics

Home > Fluke Electronics > Digital Multimeters > Fluke 16 Multimeter with Thermometer

Features at a Glance:

It's a thermometer
The Fluke 16 measures temperature quickly and accurately. Standard equipment includes an 80BK integrated DMM temperature probe.

It's a flame rod circuit tester
A microamp function is included for flame sensor measurements down to 0.1 microamps.

It's a multimeter with capacitance
Use the Fluke to test motor start and run capacitors up to 10,000 microfarads. Rely on the Fluke 16 to make your everyday measurements - up to 600 volts ac or dc, 40 megohms, diode test and exceptionally fast continuity.

Accurate temperature measurement from -40 to 750°F (-40 to 400°C)
(500°F with supplied probe)
Confidently test flame sensor circuits with microamp measurement down to 0.1 microamps
Capacitance up to 10,000 microfarads
Min/Max recording with relative time stamp records the highest and lowest voltage readings during a 100-hour period
Auto-ranging
High resistance ranges to 40 megohms
Millivolt range for compatibility with other accessories V-Check™ mode is designed for safety.
When measuring ohms, continuity, or diode test modes, the meter automatically switches to measuring ac or dc volts if more than 4.5V is present
Continuity Capture™ locates intermittent opens as brief as 250 microseconds and identifies them in a symbolic display as short-to-open or open-to-short
Sleep mode preserves battery life
4000 count digital display

Meter includes
80BK integrated DMM temperature probe, TL75 Test Leads, and C10 Holster

DC Volts Specifications
Range 4000 mV^*	Resolution: 1 mV Accuracy: 0.9% + 2
Range 4.000 V	Resolution: 0.001 V Accuracy: 0.9% + 2
Range 40.00 V	Resolution: 0.01 V Accuracy: 0.9% + 1
Range 400.0 V	Resolution: 0.1 V Accuracy: 0.9% + 1
Range 600 V	Resolution: 1 V Accuracy: 0.9% + 1

^*The 4000 mV range can only be entered in manual range mode.
Use the 4000 mV range with accessories.

AC Volts Specifications
Range 4000 mV^*	Resolution: 1 mV Accuracy: 1.9% + 3
Range 4.000 V	Resolution: 0.001 V Accuracy: 1.9% + 3
Range 40.00 V	Resolution: 0.01 V Accuracy: 1.9% + 3
Range 400.0 V	Resolution: 0.1 V Accuracy: 1.9% + 3
Range 600 V	Resolution: 1 V Accuracy: 1.9% + 3

^*The 4000 mV range can only be entered in manual range mode.
Use the 4000 mV range with accessories.

Current (AC/DC) Specifications
Range 200 µA	Resolution: 0.1 µA AC Accuracy: 2%% + 3 DC Accuracy: 1% + 2

Ohms Specifications
Range 400.0 W	Resolution: 0.1 W Accuracy: 0.9% + 2
Range 4.000 KW	Resolution: 0.001 KW Accuracy: 0.9 % + 1
Range 40.00 KW	Resolution: 0.01 KW Accuracy: 0.9% + 1
Range 400.0 KW	Resolution: 0.1 KW Accuracy: 0.9% +1
Range 4.000 MW	Resolution: 0.001 MW Accuracy: 0.9% +1
Range 40.00 MW	Resolution: 0.01 MW Accuracy: 1.5% +3

Capacitance Specifications^*
Range 1.000 µF	Resolution: 0.001 µF Accuracy: 1.9% + 2
Range 10.00 µF	Resolution: 0.01 µF Accuracy: 1.9% + 2
Range 100.0 µF	Resolution: 0.1 µF Accuracy: 1.9% + 2
Range 1000 µF	Resolution: 1.0 µF Accuracy: 1.9% + 2
Range 10,000 µF	Resolution: 10.0 µF Accuracy: 10% + 90 typical

^*The accuracy specification is for capacitors that have negligible dielectric absorption. Capacitance measured with rc charge technique that evaluates C = Q/V. Capacitors with non-negligible dielectric absorption can be measured but measurement values may be in error.

Temperature Specifications^*
Range 15 to 750 °F	Resolution: 0.1 °F Accuracy: 1% + 1.5 °F typical
Range -40 to 15 °F	Resolution: 0.1 °F Accuracy: 5% + 2.7 °F
Range -10 to 400 °C	Resolution: 0.1 °C Accuracy: 1% + 0.8 °C typical
Range -40 to 10 °C	Resolution: 0.1 °C Accuracy: 5% + 1.5 °C

^*Temperature accuracy specifications do not include the error of the thermocouple.

Safety
600V ac/dc	Maximum voltage between any terminal and earth ground. Conforms to the requirements of IEC-1010-1, 1990-09 and ANSI/ISA-S82.01-94 for use in Overvoltage Category III locations. Make ac or dc voltage measurements on electrical distribution systems to 600V where transients do not exceed 6 kV and only on circuits limited to 14 kVA if the circuit voltage rating is above 250V.
Certification agencies (approvals/listings pending)	UL Per standard UL 3111 CSA Per standard CSA/CAN C22.2 No.1010.1-92 TsV Per standard EN61010 Part 1-1993
Drop test	ANSI/ISA-S82.01-94 and EN61010 Part1-1993. 10 ft. drop to hardwood on concrete

General Specifications
Size	(HxWxL) 1.12" x 2.95" x 6.55", (2.8 cm x 7.5 cm x 16.6 cm)
Battery life	650 hours with Alkaline
Weight	12 oz (340g)
Warranty	Three years