Home
>
Fluke Electronics
> Fluke Oscilloscopes
> Fluke 125/S Industrial ScopeMeter (40 MHz) with SCC120 kit (includes case,
software and adapter)
ScopeMeter®
120 Series
The compact ScopeMeter 120 Series is the rugged
solution for industrial troubleshooting and installation applications. It's
a truly integrated test tool, with oscilloscope, multimeter and paperless
recorder in one affordable, easy-to-use instrument. Find fast answers to
problems in machinery, instrumentation, control and power systems.
The ScopeMeter 125 also features Bus Health Test
for industrial bus systems and has power measurement capabilities.
- Dual-input 40 MHz or 20 MHz digital oscilloscope
- Two 5,000-count true-rms digital multimeters
- A dual-input TrendPlot recorder
- Connect-and-View trigger simplicity for hands-off operation
- Shielded test leads for oscilloscope, resistance and continuity
measurements
- 10:1 Voltage Probe included with Fluke 124 for reduced circuit
loading
- Up to seven hours battery operation
- 600 V CAT III safety certified
- Optically isolated RS-232 interface
- Rugged compact case
As simple as
one-two-three
A three-in-one tool
ScopeMeter 120 Series combines a 40 or 20 MHz dual input digital storage
oscilloscope, two true-rms digital multimeters and a dual input TrendPlotâ„¢
recorder all in a compact, battery powered instrument. Leave all other test
tools behind because the ScopeMeter 120 Series test tool is the only one
you'll need.
The confidence to do a better job
Working under time pressure and in cramped or difficult-to-reach locations
means you want to focus on the job at hand, not on the test tool in your
hand. That's why the ScopeMeter 120 Series has Connect-and-View automatic
triggering. You don't have to worry about triggering and instrument
settings and you have all the information on screen to do the job right.
Connect-and-View
triggering for an instant, stable display
Scope users know how difficult triggering can be. Incorrect settings
show unstable and sometimes incorrect results. Fluke's unique
Connect-and-View recognizes signal patterns and automatically sets up
correct triggering. It provides a stable, reliable and repeatable
display of virtually any signal, including motor drive and control
signals, without touching a button. Signal changes are instantly
recognized and settings adjusted for a stable display. Benefit from the
speed and convenience when measuring a number of test-points in quick
succession.
One test lead measures all
High frequency waveform, meter, capacitance and resistance measurements as
well as continuity checks are all covered by the shielded test leads. No
time wasted finding or swapping leads. The included accessories allow
hook-up at test objects of every dimension.
Use TrendPlot to
help find intermittents, fast
The toughest faults to find are those that happen only once in a while intermittents. They can be caused by bad connections, dust, dirt,
corrosion or simply broken wiring or connectors. Other factors, like
line outages and sags or the starting and stopping of a motor, can also
cause a machine to stop. You may not be around to see it your Fluke ScopeMeter will. In this paperless recorder mode, you can plot the
minimum and maximum peak values and average over time up to 16 days.
The two inputs can plot any combination of volts, amps, temperature,
frequency and phase with time and date stamp to help lead you to
the cause of those faults quickly.
Battery powered mobility Up to seven hours of battery operation
frees you from mains outlets for true on-the-move working. The handheld
format and the weight of just 1.2 kg make the instrument easy to carry and
to fit comfortably in your hand. The rugged and drip proof case assures long
life and reliable operation in the harshest industrial environments. (See
technical specifications for details on battery life.)
Floating measurements, safety certified
While conventional oscilloscopes can only make measurements referenced to
power line ground, the Fluke 120 Series makes floating measurements so
there's no risk of an accidental ground short circuit when making a
connection. The Fluke ScopeMeter 120 Series test tools and the included
shielded test leads are safety certified for measurements on 600 V CAT III
industrial power systems. Using the VPS40 probe, measurements up to 1000 V
CAT II are fully supported.
Additional features of the Fluke 125
Bus Health mode allows for an
analysis of the signal quality on industrial network, comparing measured signals
to the standards’ signal requirements
Fluke 125 is the ScopeMeter of
choice for the maintenance engineer who deals with industrial machinery and the
industrial network connecting his machinery the like. The Fluke 125 has all the
functionality of the 124 plus it comes with the following extensions:
- Bus Health mode gives a clear “Good” / “Bad” indication for the
electrical signals on industrial buses and networks, such as CAN-bus, Profi-bus,
RS-232 and many more. The Fluke 125 validates the quality of the electrical
signals as soon as any electrical signals are passed along the network. It
checks the signal levels and speed, transition times and distortion, and
compares these to the appropriate standards to help you find errors like
improper cable connections and terminators. It helps you find the source of
error in case communication comes to a halt. All the commonly found
industrial network types are supported!
- Power Measurements for single phase and balanced 3-phase systems. The
Fluke 125 can directly present you the Total Power (Watts), Apparent Power
(VA), Reactive Power (VAR) and the Power Factor (PF), over a wide range of
applied frequencies, including those seen with motor drives and inverters.
As a result, you are able to easily see the effects on the various power
measurements during start-up or under changing operational conditions. A
current clamp is included as a standard.
- Harmonics mode graphically displays harmonics up to the 33rd harmonic to
assist in fault-finding, e.g. with large non-linear loads.
- RPM and Hz reading for use with electrical and combustion engines.
- Vac pwm for use on motor drive outputs, reading the true output voltage
experienced by the motor itself.
- Low impedance measurements giving a 0.01 ohms resolution for motor
windings and the like.
| Specifications |
| Oscilloscope Bandwidth |
40 MHz |
| Dual input True RMS Meter |
Vdc, Vac, Vac+Vdc, Ohms,Continuity ,
Diode-test
Current, °C, °F, Capacitance, dBV, dBM,
Crest Factor, Touch Hold and Zeroset |
| TrendPlot Recording |
Automatic vertical scaling and time
compression.
Display the actual, MIN, MAX and AVG
reading. |
| Cursors |
∆T, 1/∆T, V, ∆V, rise- and fall time |
| Real-time sample rate |
25 MS/s |
| Inputs and digitizers |
2 |
| Timebase range |
20 ns - 1 min/div |
| Input sensitivity |
5 mV - 500 V/div |
| Trigger types |
Connect-and-View™, Free Run, Single
Shot, Edge, Video, External |
| Glitch capture |
40 ns |
| Scope measurements |
Automatic: 26 |
| Maximum record length |
512 min/max pts per input |
| Memory |
20 screens and setups |
| Environmental Specifications |
| Operating Temperature |
0 ºC to 50 ºC |
| Storage Temperature |
-20 °C to +60 °C |
| Operating Altitude |
3,000 m |
| Safety Specifications |
| Electrical Safety |
600V CAT III (EN61010-1) |
| Mechanical & General
Specifications |
| Size |
232 x 115 x 50 mm |
| Weight |
1.2 kg |
| Warranty |
3 years parts and labor (one year on
accessories) |
| Battery Life |
7 hrs using NiMH |
| RS232 Interface |
Optically isolated via optional PM9080
or OC4USB for interfacing to Printer or PC |
|
