Home
> Fantech Inline Ventilation
> Fantech Bathroom Exhaust Inline Fans & Light Kits >
Fantech
PB230-2 Deluxe Bathroom Exhaust Kit 243 cfm
Fantech PB230-2 Deluxe Bathroom Exhaust Kit 243 cfm
Fantech has expanded its Premium Bath Fan
selection to include a trio of models powered
by exterior mounted wall fans.
An excellent
alternative when space is an issue or direct
venting to the outside is required. Ideal for homes,
condominiums and apartment complexes.
Choose
vent only or lighted models.
As the trend to
larger spa-like bathrooms continues to gain in popularity, the need for
proper ventilation becomes more important.
Gone are the days of a single bath fan in the center of the room. The
key to proper ventilation in oversized baths filled with luxurious
amenities is true spot ventilation at the source.
Quick removal of moisture at the source will keep your beautiful bath
free of mold and the effects of extreme moisture.
Fantech has developed its Premium Bath Fans so that one remote mounted
fan motor can effectively ventilate several areas of the bath.
Ceiling Grilles or Ceiling Grilles with Lights can be easily positioned
over showers, whirlpool tubs, steam showers, toilet and vanity.
PB230-2 Premium Bath
Fan with Dual Grilles
Includes: (1)230 CFM fan, (2) 6" Ceiling Grilles, (2) grille
housings with dampers. (8) Hanger Bars, (1) Y-adapter (4x4x6), and (1)
Fan Mounting Bracket.
Uses 4" and 6" duct.
Energy Star Qualified.
FAN SIZING FOR BATHS OVER 100 SQ. FT.
Ventilation for baths over 100 square feet is calculated
based on the fixtures in the bath.
Allow 50 CFM for each standard toilet, shower or tub.
Whirlpool and jetted tubs are calculated
at 100 CFM. Add up the CFMs for all fixtures and you'll
have the total CFMs required.
EXAMPLE
11' x 14' Bath = 154 square feet
1 Toilet + 1 Shower + 1 Tub = 150 CFM
1 Toilet 50 CFM
1 Shower 50 CFM
1 Tub 50 CFM
Total 150 CFM
YOU WILL NEED A 150 CFM FAN. |
 |
NOTE: Fantech recommends that steam showers use a
separate fan on a timer so that the fan
may be shut off during shower use and then run afterward
to dry the shower stall.
For proper airflow in typical installations (when duct
losses aren’t calculated),
use the 0.4”Ps (static pressure) rating point for
correct fan selection.
Contractor
Friendly Installation
Fantech Premium Bath Fans are “flex duct friendly” making
installation fast and easy.
We recommend:
1. Use
insulated flexible
duct.(Insulated flex duct allows sound
from the fan to dissipate gradually so that it can not be heard
in the bathroom.)
2. Ideally you should have at least 8 feet of flex duct between
ceiling grilles and fan.
3. If applicable, use multiple ceiling grilles or ceiling
grilles with lights. |
Did You Know??
The Home Ventilating Institute (HVI recommends that “the bath
fan be left on 20 minutes after the use of the bathroom” to
successfully fight the damaging effects of moisture.
A timer such as Fantech’s Electronic Pushbutton Timer (Model
FD60EM) is the ideal answer.
Simply push 10, 20, 30 or 60 minutes then exit the bathroom.
Timer will keep the fan running for the amount of time you
specify then turn off automatically. |
This item has been
replaced for stronger fan (higher CFM) by the manufacturer.
Please click
here for the replacement.
