Cadet Electric Baseboard
: The practical choice for bedrooms
Features and Benefits :
-
Oversized high temperature limit
switch with full length capillary sensor tube
-
Durable steel sheathed element with a
lifetime warranty
-
Easy installation with pre-punched
case at 1" intervals
-
Rugged steel construction
-
White or almond powder coat paint for
a durable finish
-
Lifetime Element Warranty
General Information:
The electric baseboard heater uses convection to circulate air.
By superior design and proper placement under a window area, the electric
baseboard case causes air to flow naturally. The cold air falls from the
window area as the warm air rises from the heater, causing the air to tumble
gently throughout the room. The electric baseboard heater is the number one
choice for low cost installation, and the quiet operation makes it the
preferred heater for bedrooms. Cadet recommends a wall-mounted thermostat
for optimum performance, or you may prefer the convenience of an optional
field mount thermostat kit.
Architectural Information:
Electric baseboard heaters shall be UL Listed, factory rated at
120V, 208V, and dual rated from 208V to 240V. Element shall be steel
sheathed calrod element with channel shaped aluminum fins. A full length
capillary sensor tube shall be an integral part of each unit. Case, cover,
and deflector shall be made of 24 gauge steel with 20 gauge junction box
containing a grounding pigtail. All metal pieces shall be finished with a
powder coat paint system.
Technical Information:
Baseboard heaters work best when placed under a window and at
least 1' from furniture or other objects. Keep at least 12" minimum from
objects hanging above (i.e., drapes). Do not install below electrical
outlets.
The electric baseboard heater may be placed directly on the floor and
mounted to the wall. There are only a few exceptions listed in the
installation instructions.
An optional Cadet MTX mounting tool is helpful for installing the heater.
Originally designed for mounting baseboard heaters, its applications are
unlimited.
Product Dimensions:
6.75"H x 2.5"D x Length Varies
Accessories
A matching single pole (BTF1) or double pole (BTF2) bimetal thermostat is
available to install into either end of the baseboard heater. Since an
electrical outlet may not be installed above a heater (National Electric
Code), use a Cadet BRF12 duplex outlet in either end of the baseboard to
meet local building codes. To switch between the Cadet baseboard heater and
a cooling unit, the LTF240 can be utilized. Inside corner connectors are
available to fit various designs, such as corner window areas.
Ordering Information:
Standard voltage is 240/208 unless otherwise indicated. All Cadet baseboard
heaters require a thermostat. For optimum comfort use a Cadet electronic
thermostat or a dual diaphragm thermostat. Color of choice determined by
adding an "A" (Almond) or a "W" (White) at the end of the model number.
