Home
>
Smoke
Detectors >
BRK Electonics >
BRK Electronics Accessories
> BRK RM3 120 VAC relay for BRK Electronics brand smoke alarms, carbon monoxide
alarms or heat alarms
Model RM3
This 120 VAC relay can be
used with BRK Electronics® brand smoke alarms, carbon monoxide alarms or heat
alarms to signal auxiliary devices like horns, bells, and door closures.
Features
- Relay has Form C contacts
that switch between a normally open contact and a normally closed contact
when smoke alarm goes into alarm.
- Maximum contact ratings:
Voltage - 120V AC and 30V DC; Resistive - 15 amps; Motor - 1/3 horsepower.
- Fits into most standard
junction boxes.
- Simple installation.
The RM3 accessory relay is designed
to activate an auxiliary device like a bell, light or door closer when used with
BRK® Electronics 120V AC smoke, Heat or CO alarms. Once connected, if the alarm
is triggered, the RM3 sends a signal to activate the auxiliary device. The relay
deactivates automatically when the alarm stops.
Relay may be wired next to alarm,
or from a remote location. If wired remote from the alarm, a maximum of 1,000
feet of #18AWG or larger wire, rated at least 300V should be used. The 120V AC
relay is to be used only with 120V AC BRK® Electronics alarms, to a maximum of
18 interconnected devices. The RM3 will not receive signals from alarms
operating on battery or battery back-up power.
This item has been
discontinued by BRK Electronics
