|
PRODUCT
DESCRIPTION
The Line Voltage Halogen modular
series provides economical halogen lighting by utilizing 120-volt halogen
lamps that do not require a transformer. Fixtures may be dimmed to create
night and mood lighting via fixture mounted hi-lo-off switch or wall mounted
dimmers. The compact design is ideal for undercabinet, undershelf and task
lighting where bright, halogen light and dimming capability is desired.
FEATURES
-
Economical design using 120-volt 25-watt halogen lamps with a somewhat
warmer tone than low voltage halogen
-
Modular
design for simple plug-in portable installation and plug together
connection of multiple fixtures
-
May
be permanently wired using optional Direct Wire Module
-
Narrow
profile 3"D x 1-5/16"H
-
Dimmable
using fixture mounted high/low/off switch or wallmounted dimmers
-
2,000
hour rated lamp life
-
Designer
White finish
PRODUCT
SPECIFICATIONS
25watt 120volt halogen G8 bi-pin lamps supplied with fixture . 2,000 hour
rated life.
Housing
: Extruded aluminum painted designer white. Reflector Secular
aluminum inner reflector.
Diffuser:
Frosted tempered glass lens.
Switch:
Convenient integral Hi/Lo/Off rocker switch.
Dimming:
Use better quality incandescent wall dimmers.
Labels:
UL Listed.
ENGINEERING DATA
| |
UH106 |
UH212 |
UH318 |
|
Total input power (watts) |
25 |
50 |
75 |
|
Total Operating AMPS |
0.21 |
0.42 |
0.63 |
|
Power Factor |
0.99 |
0.99 |
0.99 |
DIMENSION
Fixtures :
UH212-WH
12" 2-Lamp
Line Voltage Halogen Supplied
with field-shortenable 6' cord and plug, joiner connector, (2) G8 120V 25W
bi-pin halogen lamps, and mounting hardware.
12-1/8"L x 3"D x 1-5/16"H
(Add 2" to length for side entry of power cord.)
Finish: Designer White
INSTALLATION
UH series fixtures mount with captive mounting screws and
install without having to open the fixture or remove the lens.
Portable : All UH
series fixtures are supplied with 6' power cord and removable insulation displacement type plug to allow
field shortening. The power cord attaches to either side of the
fixture. Note: Allow 21/2" of side clearance for insertion/removal of
the power cord.
Direct Wire: UH
fixtures may be direct-wired with non-metallic cable or flexible metal conduit using the optional DWM1
Direct Wire Module accessory (sold separately). The DWM1 is
supplied with a 36" field-shortenable jumper cord to bring power to
either end of the UH fixture. Note: Allow 21/2" of side clearance
for insertion/removal of the jumper cord.
Electrically Connecting Multiple Fixtures :
Up to 750 watts of UH fixtures may be electrically joined together using either
the straight joiner connector supplied with each fixture or the
optional JC2 jumper cords. See accessories below for lengths.
|
