Liton  LH1399  3" Low Voltage Standard Airtight Housing

LAMPS • (1) 50W MR16 12V, GY 6.35. Maximum wattage is subject to selected trim(s).

SOCKET • 2 pin porcelain socket with aluminum heat sink plate. Lamp clips to trim to ensure proper and consistent positioning.

HOUSING • Low 5 1/8"  profile for shallow ceilings. Pre-wired .05"  baked enamel 1-piece drawn steel housing adjusts up to 1 1/4" ceiling thickness. Trim is secured with torsion wing springs/standard coil springs. Brackets may be flattened out to accommodate 27" bar hangers. Non IC rated housing must be kept 3" from insulation.

MOUNTING FRAME • Supplied with (2)24" adjustable bar hangers with 90ē repositioning ability. Bar hangers equipped with (nail-less installation) 3/4" serrated barbed studs for secure mounting in wood joists. Earthquake structural cable compatible for drop panel ceilings or any other mounting that requires direct support from structural ceilings.

TRANSFORMER • Class H insulated magnetic transformer installed adjacent to J-box, accessible. Thermally protected rated for 90ēC. Remote transformer available, please consult.

JUNCTION BOX • Pre-wired, galvanized steel J-box (13 cubic-inch) with (4)1/2", (3)3/4", and (4) Romex knock-outs. Strain clamps and ground wire. Die-cast aluminum fitting.

 LABELS • UL/CUL listed for through-branch wiring (4) No.12 AWG 90°C and damp locations.